New Product - Vector Off-Road MP Table

[Vector OffRoad]

FREE SHIPPING THROUGH 11/30 IN CON US.

MP Table (Multi-Purpose Table) $159.99 In stock and shipping immediately.

The Vector Off-Road MP Table (Multi-Purpose Table) installs to any vertical surface with a minimum surface area of “29-1/4” x 11-1/16”. When stored in the closed position the table only protrudes a maximum of 1.25” from the mounting surface. The working area of the table is 11" Deep x 27.5" wide.

Designed to provide maximum usability in a light weight and slim package, the MP Table incorporates ¼” holes and slots to allow the use of QuickFist™ Clamps and Molle Straps for mounting trail gear, tools and pouches to the table. There are also convenient holes along the outer rim of the table for hanging your cooking tools if you are using the MP Table as the base of your kitchen. To quickly deploy the table, remove the two knobs on either side of the table, fold the table down, and place the knobs back on the studs.

The MP Table is laser cut and manufactured in the USA from aerospace alloy aluminum. All of the mounting hardware is high quality stainless steel and is easily field serviced. Even the cables are 100% stainless steel and polymer top coated to further prevent rust and fraying. The MP Table will provide you with many years of trouble free service.


View attachment 48900

View attachment 48901

View attachment 48902

View attachment 48903

View attachment 48904

View attachment 48905

 

[Vector OffRoad]

MP Table Sale. 3 days only. Marked down from $159.99 to $135.99 + Free Shipping in the CONUS.

 

[Titanpat57]

That's a nice peice of trail gear...workmanship looks top notch and very pratical. The price is very reasonable for the what you get.

Best of luck with the sale

 

[rk_az]

Webroot (my internet security software) stopped me from visiting your site (www.vectoroffroad.com). It says:

"This Web site has exhibited suspicious behavior or is similar to Web sites that are known sources of malware, viruses and spam. Visiting this site may put you at risk or compromise your identity or privacy."

You may want to have your IT people check the site for infection.

 

[Chazz Layne]

Very nice, both the table and the price. Almost makes me want to buy instead of build. Any chance of a 36"+ wide version? Black powder-coated?

 

[Borrego60]

That is a nice sharp looking table.Kinda makes ya wish you had a jeep or some other type of vehicle with a swing out tail gate.

 

[Hill Bill E.]

That is a nice sharp looking table.Kinda makes ya wish you had a newer Jeep or some other type of vehicle with a swing out tail gate.

Fixed it for ya!:victory:

It is a nice table! Unfortunately, my Jeeps all have drop down style tailgates:snorkel:

Might be nice on the trailer though, if I could cover it to keep the road grime off while traveling, or have it 'quick mount' to the trailer back/side, and carry it in the trailer.

Kind of tired of balancing the stove on the cooler:snorkel:

 

[Vector OffRoad]

Very nice, both the table and the price. Almost makes me want to buy instead of build. Any chance of a 36"+ wide version? Black powder-coated?

We don't have plans currently for a wider version, but if there was enough interest, we would look at it further. We do plan to start anodizing or Powdercoating them with our next batch of tables.

 

[Vector OffRoad]

Fixed it for ya!:victory:

It is a nice table! Unfortunately, my Jeeps all have drop down style tailgates:snorkel:

Might be nice on the trailer though, if I could cover it to keep the road grime off while traveling, or have it 'quick mount' to the trailer back/side, and carry it in the trailer.

Kind of tired of balancing the stove on the cooler:snorkel:

That was our intent with the design. You can mount the table to any vertical surface. Thanks for your interest.

 

[Vector OffRoad]

We are running a sale on the MP Tables now through Sunday, $30 off + free conus ground shipping!

We are also running a marketing promotion that can get you an additional $40 rebate on each table. To qualify for the rebate you must install the table on an application that hasn't been previously seen and send us high quality pictures of the application. Currently the only application that doesn't apply is a rear tailgate JK. For example if you buy a MP table and mount it on the rear tailgate of your land cruiser or on the side of your offroad trailer and send us a picture you would qualify.

 

[Honu]

the link is not working ?
is that $30 off the $129 on the site ? meaning its $99 ?

or is the $129 reflecting the $30 off already ?

 

[Vector OffRoad]

the link is not working ?
is that $30 off the $129 on the site ? meaning its $99 ?

or is the $129 reflecting the $30 off already ?

​

$129.99 is the sale price.

 

[Honu]

thanks

 

[Vector OffRoad]

Mount it in your FJ or on your trailer and get an additional $40 rebate when we get nice pictures!! $89.99!

 

[trail-explorer]

I looked all over your website and could not find any "contact us" info.

Where are you located?