Search results

Based upon what has been said here I understand that there are 2 different height requests: One for a unit with an exterior height of 12" and another for an interior drawer height of 4-6". The 12" exterior height is no problem at all. An interior drawer height of 4" is not practical, a minimum...

Nicest 416 conversion I've seen yet Patrick. Props to ya man!

Parts available from AT for indy builders: AT Shock mount, 3/16" thick: $6.50 AT Air Spring Mount, Gusseted, 1/4" thick: $28.90 Firestone Air Spring, #6781, 5.5-6.5" ride height: $109 PM or e-mail me or Martyn

You are probably correct in that regard. As a Mfg we have a very specific set of rules and submissions to follow. I think the path of least resistance by allowing the DMV to issue the VIN is probably the least grief ridden. Just to give you how strict the rules can be for Mfgs, one of our SA...

Sorry but this is incorrect. A trailer VIN is a 16 digit code that contains a SAE issued WMI #, identifies the manufacturer, where it was made, year it was made, model, # of axles, overall length, sequential build number and if that was not enough, it contains an algorithm that defines what is...

Lagavullin. A smokey and peaty single malt, guaranteed to cause contemplation

I would suggest a boat cover or sailmaker. You've got plenty all the way up the peninsula & the east bay.

Well said John. A few years ago we set out to make our own roof tents and quickly found that there is a huge range in price for fabric. Case in point is that the ARB, Open Sky, Cartop Tent, Rooftop Tent, Camping Lab are all made by the same company (Shanghai Fosset) using the exact same...

Yes it comes with hardware to mount to most aftermarket and factory load bars.

We are happy to present the latest innovation from Baja Racks that is the perfect solution for combined cargo and roof top tents on long wheel base vehicles. This nicely designed and well built powder coated rack measures 48" wide x 84" long. The flat area for tent mounting is 48" wide x...

Nicely done.

Deah horse = ketchup

Finally made a little progress on this project in the past week: Frame reinforcements are done. Reservoir Fox front shocks are in. Aluminum intercooler tank has been made. Mounts for Fox jounces made. Next: Currie Anti Rock. Spal dual fan installation. Weld in mounts for Fox jounces for...

Looks like the route from Saline Warm Springs to Eureka Sand Dunes...Dedekera Canyon & Steel Pass?

Steve, Backcountry Trailers is the design that Bob Maziotti, former owner of Tentrax ripped off and claimed as his own. The design was originally conceived by Jim Church who is no longer in the trailer building business. The suspension is a Dexter torsion axle. If your friend wants to know...

Compliance in the EU is quite complicated. I just returned from Germany where over-ride couplers are required. The regulations state that the mfg of the chassis must certify the entire system through the TUV i.e. the chassis, the brakes, the mechanical linkage and the over-ride coupler as one...

AT uses the 212 & 303. We also have some stock of the 102 for builders but we will not use them on our own trailers. L&R does not make a limiting coupler greater than 2000 lbs for the reason that if you were operating a trailer heavier than 2000 lbs and your trailer got to the the end of the...

Congrats on your trailer acquisition. I remember seeing that trailer about 3 years ago in the Outlaw Offroad booth at Off Road Expo in Pomona. Nice rig. SOA if I remember correctly.

No time to work on it, busy making new trailer. Need to get cloned.

The carpet will work perfectly. I bet a nice scrap is for the asking at your local carpet store.