Search results

Got this last month. Ball Engineering Master II DLC. Swiss automatic, 51 tritium gas lights. My first big boy watch. Sent from my Z10 using Tapatalk 2

Why? Like you never had overheated rear brakes before? Sent from my Z10 using Tapatalk 2

This thread turned up some cool links. The zena system looks pretty interesting. Engine on the 150amp model is rated at 8hp, just under 6000 watts. It looks like this is at 7000rpm. 65 # is not too far off from what the op was looking for. Sent from my Z10 using Tapatalk 2

One horsepower is 745 watts. Amps times volts equals watts (power). Welders use lots of amps and low volts. No weed Wacker engine is going to power a welder capable of doing any expo emergency work( frames ect) Sent from my Z10 using Tapatalk 2

I may have misread, but one amp drawn for one hour is one amp/hour. 24 hrs per day times 10 days equals 240 hours. So your 1 amp parasitic load for 10 days is 240 amp/hours Sent from my Z10 using Tapatalk 2

My local dealer has a 3500 SRW listed with the 5.7 Hemi, not the 6.4 I assumed it was a typo, the chart above indicates you can order either Hemi? (at least in Canada) Seems weird that they would keep production of two gassers so close in size, maybe depends on build date??

Dude! You shouldn't have used the words "extremely reliable " in the intro post!!! That sux!! Sent from my Z10 using Tapatalk 2

Picked up a Suunto Core Military new off ebay/ last one I could find at a decent price, $228 Inc Fedex. Build date about 90 days ago. Hopefully most of the bugs have been worked out :) Sent from my Z10 using Tapatalk 2

I like the offset crown on that pilot, I have Citizen eco drive that I like the looks of, but I have almost seriously damaged small bones in the back of my hand when I forgot and put all my weight on my left hand, with my wrist bent back. It has a metal band and the combo of the the large crown...

thx for the help, I am going to see if I can find a maintenance free,sealed GC2

Here is a nice battery size chart http://www.rtpnet.org/teaa/bcigroup.html

Is there a standard size for golf cart batteries? I did a ton of research, on most all aspects of my build , but fizzled out on the electrical.I need to get rocking and rolling on the interior build, and the battery box is a big chunck of the structure. The golf cart batteries I looked at are...

I am rebuilding the interior of my alaskan from scratch, and have room to build a decent sized battery enclosure. I am very familar with commercial DC systems and charge /venting concerns, maintenance ect. I am not really up on auto/expo batteries, seems like many use group 31. I basically want...

I should have been more clear. The upper part of an Alaskan is framed with 2x2s, the lower half is all plywood. 3/4" front wall and floor, the rest is 1/2". My point is that even with this lighter build method than yours, a 8' cab over is around 1700lbs dry, but that does include a full interior...

Dude you are my hero! Every time it snows I have to hear about my tools and camper taking up space in the shop( garage) If I expanded to the living room I would be able to sing in a boys choir :) nice job so far. As many have stated weight will be an issue, stick built campers(alaskan) use...

That was cool, thanks!

I'm home sick, so I'm partially stewed with robotusin :), and missed the obvious, did you say that it never worked, even when installed? If this is the case I would pretty much start from scratch, and look at everything/ wire size as stated above, any connections and proper grounds ect Sent...

Before you start adding more amps and volts, I would try and see if you have a problem, loose connection or short. Your issue should be how long it can run, not getting it to run at all. Check the battery with a meter or a headlight ect and make sure it's good first and go from there, does...

Thanks , that should get me started.

All in now! Just ordered Arb 50qt fridge. Thetford cassette toilet. Water tank and pump, plus 6 gallon hot water heater (wanted tank less, but read bad things) I really want the toilet Fwd curb corner, but getting the cassette out in the living quarters seem gross, and I don't want to go thru...