Search results

  1. plh

    Ride after torsion bar crank

    Google machine - fraction of a second, page 50: http://www.arbusa.com/Uploads/PDF/onlineManualsGuides/OME_Guide_current.pdf
  2. plh

    Ride after torsion bar crank

    2" is a lot. Cranking the torsion bars does not change the spring rate, it only changes the ride height. As Toasty said - things get really messed up if you hit the bump stops which a 2" raise is likely to do. As a note - cranking the torsion bars also changes the suspension travel in the up...
  3. plh

    Gen 3 front strut or coil 50mm spacer?

    Currently stock spring? I'm in the process of obtaining (in transit UPS says) ARB OME medium springs for all 4 corners of the '05. It will be riding on KYB Gas-A-Just shocks & 285/75R16 tires. BTW - those spacers in the photos above sure don't look like 50mm. More like 25mm (maybe 30mm).
  4. plh

    disabling ABS on 95 SR

    '95 isn't OBD2 - I'd be surprised if turning it off screws things up too much. '96 and forward - OBD2 ...
  5. plh

    MUT reader or Raspberry Pi/Arduino stand in

    I've never used it, but I think EVOScan works on the early ECUs (Mitsubishi spin of OBD 1). Interface cable from ebay. Its $25 for the software. http://tunertools.com/evoscan!!!-software-license-!!-for-the-mitsubishi-and-subaru.html
  6. plh

    Gen 3 cats/downpipes

    Here is a photo before installed. 1 is drilled out to 1/2". Other is left alone.
  7. plh

    Anyone have an Outlander (V6)

    A new Mitsubishi dealer opened semi near by my work (a LOT closer than the other ones in the metro area) 2 months ago. Dealer also owns a Nissan dealership - so maybe something happening in regards to the partnership. Anyway - ordered some suspendion parts from them for the '05 and picked them...
  8. plh

    Gen 3 cats/downpipes

    I've heard mixed success, however, they gave me a PASS
  9. plh

    Gen 3 cats/downpipes

    Just wondering if you tried a "spark plug non-fouler" modification to the o2 sensors after the cats before replacing the cats.
  10. plh

    Tires on Gen 3 - What are you running, how is the noise

    bumping this up again, Adding the medium OME springs next week along with KYB Gas-A-Just shocks, so will definately go for 285/75R16 tires on the 20th anniversary wheels. Cooper AT3?
  11. plh

    Android based GPS (with offline traffic) and back up camera; can it be done?

    I'm looking at something like this: https://www.amazon.com/dp/B01EG4S20K/ add apps: Google Maps, Here (good off line maps), Waze, BCN etc. Tether to your mobile phone via wifi when needing a data connection. I know android can do live USB video - I use a small USB camera (microscope) with my...
  12. plh

    94 montero sr no brakes

    agree with MFSR. Look for a leak (all the lines - hard and rubber), then do a brake system bleed to remove air, if still poor - none, master cylinder. I've been around Monteros and their forums for a long time and have never heard of a faulty or leaking Gen 2 ABS unit. Anything is possible...
  13. plh

    94 montero sr no brakes

    No
  14. plh

    1998 montero compass not coming up

    maybe the connection in the back of it came undone?
  15. plh

    Spring options for gen 3?

    I'm thinking OME as well for my '05. Same issue. Around 140k on the clock, shocks are shot. Replaced the rear reciently with KYB Gas-A-Just. Thinking same for front and OME springs all around.
  16. plh

    Tablet or Garmin, what's your poison?

    Lenovo Tab 2 A8 8" screen - RAM X mount - BCN (downloaded maps), Here (downloaded maps), Google Maps, Waze. Tethered to my Moto X Pure (Project Fi). Probably some tab newer, better and cheaper by now. I've been using this one for about 2 years. Netflix & SDR - so many apps.
  17. plh

    Installing truck box latch

    good plan
  18. plh

    3.8L timing belt change (gen 3)

    Guessing this is one: http://milwaukee.craigslist.org/cto/5699457676.html
  19. plh

    Gen 3 cats/downpipes

    Did it clear your codes? Did you also put in new o2 sensors? My '05 is throwing cat efficiency codes again and is due for emissions check in September. I put in new Denso o2 sensors (4x) 2 years ago and the SE light stayed off for ~8 months, so guessing it really is the CATs.
Top