Search results

I went with this: It is a Harbor freight "Race" jack, I made the upper saddle out of 2x6x.120 wall rectangle tube and notched it to fit around mw axle trusses: For off road use I found a vendor on Pirate that makes this skid for the bottom: Between this and my HiLift I feel pretty confident...

Not for me! I had a 99, and over the course of 40K miles (starting at 90K) lost 3 lift pumps(the stock one, a relocated stock one, and an aftermarket one) an injector pump(I'm sure due to the lift pump), then to top it all off it was one of the "53" blocks that developed a nice crack and...

Thanks! 4 of the 70's are repowered withLifan 110cc E start motors, and the 5th has a Pirahna 150 E start with a manual clutch. The 350 is now a 500X thanks to Hurricae635 out of New Mexico. The black quad is a 300EX with 400EX arms and a 350X swingarm and rear shock. I just can't leave...

If you have the case out check the chain for strech. Pretty straightforward replacement once it is out. You will NOT want to take it back out once you have pulled it and installed it once. It is a heavy ******** with no good jacking points.

It is a 203. there should be a round aluminum plate on the back between the output and the round cover staing so.

This will serve as an expedition vehicle / Baja Chase truck / Tow rig. It will be used to tow this: and these: Ive also added these:

It is currently getting painted satin black, I hope to get is completely finished this winter. The full specs are: 1999 Ram 2500 V-10 QC SB 2005 PowerWagon front springs Carli mini packs with no overloads on rear King shocks valved by Don Thuren Trussed 2006 Power Wagon axles front and rear 3rd...

I hated the beige headliner: Overhead console: Locker switches: (remover the pass air bag switch) Relay bank from early 90's GM sedan: Flip out mirrors: NOS doors:

Finished rack: A little flex: Rear King shock: Removed the factory blocks, rear shackle flip/extended front hangers: Trussed PowerWagon front axle (4.56 Electric locker)with modified floor jack: Trussed rear PowerWagon axle (4.56 Electric locker) Front control arms: Updated 2008 up...

Roof rack: Bed Floor: Start of rear bumper/Tire rack: Finished rear bumper: Rough trimmed fender: Rhinolined bed: Storage

The first step, A fiberglass stepside bed and H2s: Front fenders to match: Dimensions for the front bumper: First bumper bar: Grille Hoop and lights: Finished bumper: Starting the bed frame:

Why do people always comment on the added weight? Herculiner weighs ~ 10Lbs a gallon, how is that a problem, it's not like you are going to use 50 gallons of the stuff. With that said, I have used lava liner (Good stuff, not sure if it is around anymore, it stayed more rubbery when dry)...