Search results

I'm confused, how are you going to use a solar charger without a battery or a solar panel? You will need at least a battery to maintain a constant voltage for the refrigerator. And then some way to keep it charged. A solar panel and a charge controlled will do that for you. I use 120w folding...

Go to my website and search SOLAR....lots of info that will be very appropriate to your question...www.rvbprecision.com

Couldn't stand it any longer. Needed to go camping......My backyard was the destination....

I needed a utility trailer and what better time to build one that during isolation......Here is an article I published to my web page with lots of pictures. Hope you enjoy it. http://rvbprecision.com/rv-projects/tent-trailer-to-utility-trailer-a-covid-project.html

You are going to love this Renogy DC to DC charger. I have the 40a version that I have connected to Anderson plugs so I can swap it between my SUV and my truck. Works great to keep aux battery for the refrigerator charged. I don't bother carrying a generator any longer. 120w of portable solar...

I idle my engine in real world to charge a 100Ah AGM battery using a 40A DC to DC CXharger. Not hypothetical. It works great. I put 40A into my AGM at bulk and can take it from 70% charge to 95% charge in about a half hour. The truck has a 220A alternator. I've tested temperature of the...

There is nothing better than a DC to DC charger (Renogy) if you need to charge your batteries while traveling and the weather is not cooperating for your solar panels. I use my 40A Renogy DC to DC charger to charge my batteries while camping if I'm not getting enough solar. Simply start vehicle...

Today I got the top rails installed. I decided to use 3" X 3" X 3/16 Angle, mitered at the corners and welded top the uprights.....Love it! Thank God for my bandsaw! Lots of intricate cutting here... AND...Wheels/Tires and Fenders showed up today Tomorrow I'll build the tailgate...

I had a friend that built bunch of trailers using VW Golf rear suspensions. This was a few years ago but it wasn't difficult.

Sides are on...Bumper in place....Need to look at this bumper again when fenders are on. Might need more of a bumper shortening. I left it wide to add some protection to the trailer lights.

Sometimes a plan comes together....even when you are not planning it! The metal I cut off the sides of the trailer were re-purposed as the uprights to hold the side panels. Look how a piece of 5/4 Pressure Treated Decking slid right in! Made screwing the sides to the uprights real easy...

Those are "C" Rated tires with 1820# each......The axle is only rated at 2500#.......Skimpy? Not so much.....

LED Light Kit, Fenders and new Wheels and Tires are ordered..... All ordered from Amazon.......

This pandemic thing has me on a scale of 1-10 for boredom at 11! I needed a project. I want to buy a mid-size garden tractor for use around the property. But I need a way to transport it. So I needed a Utility Trailer. Want to use it for transporting canoes and kayaks and bicycles too. I was...

So, I can't start one here? Not sure what the protocol is with regard to this.

i just did this with a 20" piece of stranded telephone/data cable. works great! i tested it by setting the controller 10 degrees higher than ambient temperature and then used my heat gun to raise the temperature of the LED control panel. Heater cycled perfectly. Should make a huge difference in...

I was recently talking with the head service manager at my Jeep/RAM dealership. I asked what was the worse vehicle to buy. He said, without a doubt, anything with the 3.0 diesel to avoid. He said they have sold few of them and they are always in the shop for service in a disproportionate amount...

Had some time today to "Farkle" the Chinese Diesel Heater today........ Lots of pictures and write up on my web site. Enjoy! Chinese Heater Modifications

Now this is different! But I love it!

Kitchen is awesome. What is the extruded stuff you used.? Source?