Search results

Ordered some tires for this thing today, since it's getting close to being able to get on the road! Also got out the vinyl cutter and made some stripes to match the Raider...

For anyone not following my (admittedly pretty boring) rally trailer build, here's a couple shots from today. Making progress!

It was 60 degrees today and I was off work, so time to haul the trailer outside and do some sanding and painting and stuff.... Started off by sanding down the 4-5 layers of paint and bondo on the tailgate, then wet-sanded the whole thing and primed it. Next order of business (after...

So yesterday as I was about to jump in the shower, my wife comes and gets me because our mail carrier got her truck high-centered on a pile of snow across the street, and apparently my other neighbors are helpless when it comes to giving a tug or push. So I grab the Raider and pulled out there...

In order to have a cover panel for the motorcycle "notch" in the front I dug out the original metal piece I cut out of there in the first place, because waste not, want not... Since I want the panel to overlap, and it doesn't need to be as tall (due to the square bars top and bottom), I just...

Painted the upper rails today so I could install the tonneau. Because of the rail misalignment I noted earlier, I could only use the included (kinda cheap) clamps from about midway back. Toward the front I just drilled a couple holes and bolted it down. More secure than the clamps anyhow. I...

So this morning I was woken up at 6am by my wife telling me there were a bunch of police cars out front. I live in a very quiet suburb, with virtually no crime, so one cop is unusual. But there were 5 police cars and a "paddy wagon" van out front, and a disabled Altima in the middle of the...

that's the plan, or at lest just put down a couple pieces of angle iron in the front wheel area. I'll also have a cover panel for the opening (not made yet) so if I'm carrying mulch or something, it stays in the bed :)

It's been cold and crappy this week, so i cranked up the heater in the garage and did some painting. After wire-wheeling any remaining surface rust, did a full coat of the bed and bed sides with brush-on rustoleum, 2 coats to seal everything good... Today once that had dried for a couple days...

So part of my plan for the front area of the trailer where I made the opening for a motorcycle is to have a "brace bar" that bolts on there, also giving me a backstay for our toolchest at race events. I wanted to integrate some big tie-down loops as well, so I did that: Pretty nifty, eh...

I'm not sure if it's required or not, but every trailer I've owned has orange side marker lights toward the front end so morons driving next to you at night don't change lanes into the trailer. Required or not, I like safety so decided to install some on this. They look a bit goofy now, but I...

So one of the goals with this trailer is to be able to carry a motorcycle. I don't actually OWN a motorcycle, but I have a number of friends who have off-road/adventure bikes and at some point we may want to do a road trip to someplace to go adventuring in our respective vehicles (me in the...

So on the trip up to PA last week I also found that my rack/fairing STILL makes an annoying resonanace at highway speeds, and I'm pretty sure it's the fairing itself making the noise because it's not stiff enough. So time to try something new. The old fairing went to the front of the roofline...

Side note, the list is up to 13, so just need two more and I can submit.

Yup, not ideal for slippery stuff (i.e. winter roads). I've heard that guys with non-selectable front lockers and manual hubs basically just unlock one hub when doing light snow stuff, and become "three wheel drive" essentially. I honestly never use 4WD in the winter (in the Raider or my...

Headed up yesterday to Rausch Creek, which is a huge ORV park in Pa about 3 hours from me. Lesson from the way up: on long inclines, the Raider will do about 70 with the pedal on the floor in 5th. The bigger tires and stuff on the roof have definitely added some resistance to speed. But of...

Thats the goal!

Good eye, but it's ctually its a NEFR decal (same style), but the Sequoia does have a SB decal on it as well. I've been 3 times - ones just hanging out, once as crew chief for ZERO car, and also rode shotgun with fast sweep for a few stages. My rally car (e30) isn't terribly well-suited for...

Still keeping a list, but haven't gotten the 15 so far. I think I'm at 5 or 6. Figured I'd just leave this thread up until there are enough people, and then let Aussie Lockers know at that point. So if you are in, shoot me a message with your name/email and I'll put it on the list. Once we have...

Yeah, I initially had thought about using the rear frame and axle from the Max (still sitting in my back yard.....) but just from a weight perspective I must be saving 200lbs easy by doing it this way instead. Plus I always think pickup bed trailers that use the original frame look strange...