Search results

Hitch sold. Dog divider and barrier still available. If it needs to be shipped, let’s talk. I had it shipped to me via greyhound freight for about $100.

Price lowered $50 and $100 to come in under eBay comps.

I have held on to these parts for a long time after selling my LR3, expecting to get an LR4. I’ve ended up with a 2 door RRC so it’s time to move these things along. “Short” Tow Hitch - $350, including shipping. The original long one gives you a worse departure angle and was discontinued...

Welcome to the forum, Johstacy. You I think are the first Rivian owner to join! I’ve had an R1 reservation since June 2021, and should be taking delivery in the next few months. Rivian was supposed to be working on a factory winch option but they have not made any announcements since fall 2021...

Totally agree. They’ll need to cram at least 135 kWh battery into this to sniff 300mi EPA. That 300mi range is probably using the WLTP (European) rating which is about 25-30% greater than EPA on the vehicles I’m familiar with. Using WLTP I think 300mi on 100kWh is a stretch, but possible if you...

The LR3 does have a variable output alternator from factory.

Leaks at the A-pillar are a known issue. The lowest clip connection should be taped over as shown here (black tape). Replace all the gaskets on the yellow clips and you’ll be good. If you haven’t already, now would be a good time to do the cowl intake cover as well. Sorry, I cannot help with...

Link doesn’t work. Bummer. Good LR memorabilia is hard to find.

I hope the Defender volume picks up enough to justify a modern D130 pickup. Sign me up! The third row in my LR3 is pretty good for adults as well. The cargo area of the 110 is surprisingly small, that was the biggest surprise when comparing it to my LR3. I think the 130 would fit my wants and...

These tools are definitely necessary, even with the steel pan swap. There just isn’t much room between the exhaust & transmission cross member and pan. The heat shield frame is really annoying too. I bought some shorter stainless bolts from the hardware store which made reassembly a bit less...

I’ve got an OEM cargo load tray. It’s like the mat, but goes up all sides 3” and is made of a heavy duty plastic so it is water tight.

Multi-meter Zip ties Wire cutters Tail lamp bulbs Repair or shop manual (the one the dealer has) Owner’s manual (the one in the glove box) PB Blaster or WD-40 Ride height sensors Wrenches (fit in smaller spaces than a ratchet) Twine Tire patch kit Jumper cables (battery jump boxes may not always...

Here are the front: https://rimmerbros.com/Item--i-RVF500011--SelectedCurrency-3?srsltid=AdGWZVSWA4n1hX7LhSKROK7FfOcwaNWE5WQ6XraOlVAuWWowDLpD_bQiUR8

You can buy ZF Lifeguard 6 for $15/L at several places. It’s really not too bad, it used to be much more expensive. 7L is a good amount to have on hand for a standard filter change, 10L if you are removing the valve body. You can buy the fluid, filter, and steel pan conversion for $350-500...

Considering I ordered my lighting on 5/19/21 during the reveal and haven’t been contacted for final ordering, I support this rule. It’s frustrating for someone to buy one to flip when I’ve been waiting longer and want to buy one to keep for 15 years.

It IS sexist to assume someone’s daughter is incapable of holding a wrench and needs the help of a “smart” man to do so for her. Keep in mind at the point in the thread where this was mentioned the only evidence we had was someone asking about an emergency toolset for his daughter at college...

Hopefully this hypothetical boyfriend isn’t this sexist, either.

Found this old thread, curious if @DiscoDavis and @Victory_Overland have some update photos to the 5+ patina on these gorgeous covers and, if I should be so lucky, might have a line on a set to resell. I’ve been searching high and low for a second hand M&M set since we got our LR3.

Did some off-roading last weekend with a bunch of new 110s, a 90, and several other LR models. The design of the Defender has grown on me a lot in the last year, so I was interested in seeming them up close. The interiors look good. Having a dog and preschooler, I’m all about easy to clean...

I’ve had mixed experiences with aftermarket parts, so I decided to stick to OE for anything critical (suspension, drivetrain) or where the labor involved is high. FCP Euro shows Lemförder as the OE supplier for your toe rods. They are $20 each for outers. While it’s totally possible for...