Search results

No it came installed. But I wired my replacement based on the diagram I posted above.

Ok, sorry for the delay. The connector looks the same as mine: And I believe this is the pinout (this is a Mitsubishi/Dodge diagram, seems to be the same but no rear speakers.) The connector was used on quite a few Mitsubishi vehicles so you may be able to find an ISO harness that will...

This reminds me of the joke about the tourists in Ireland who asked a farmer how to to get to Dublin. His answer - "well if you be wanting to go to Dublin I wouldn't be starting from here". Therein lies the problem. It's like asking how to remove a screw with a hammer. It can be done, but it...

I put in a 10" Joying Android unit. Lovely big screen, but still a work in progress getting it set up how I want it. I'll have a look at the connector on mine tomorrow. There are not that many wires.

I have some info on the 2021 NPS head unit pinout, but it might be different. Can you get a photo of the connectors, and the wire colours on the back of the plug? i also have a new head unit from a 2021 NPS that I have been meaning to sell - I took it out as soon as I got the truck and put...

Composting toilets, at least the RV kind, don't really compost, since full composting takes 12 months or more, but since you only have to empty them every month or two it's easy to schedule that when waste disposal facilities are available, and in the meantime the contents are completely...

The brand new RV plan allows you to suspend the service on a month-by-month basis so that would be perfect for you. I asked if I could switch to that but right now it's only available on new orders, and even when they do allow switching it will work only with the [] dish not the round one I put...

Well, you can't order the system for most of Qld north of Bundaberg, but I'm pretty sure there is actual service available up the east coast as far as maybe Cairns - there are certainly ground stations in central and north Queensland. If you look carefully on the map you will see there are some...

The dish does not *need* to point to the north (or south in my case) - it chooses to do so to optimise the view of the most satellites. The actual steering of the beam is done electronically. If you unplug the motors it complains but works just fine anyway, perhaps with some reduction in...

Starlink dish installed on roof. Just got to finish wiring and test.

I wonder if putting VGs at the front of the habitat would have more effect on drag than at the back.

Going from 12V to 24V gives significant advantages in terms of cable size required, the same applies again going to 48V but the overall impact is probably less. 24V has the advantage that many RV applicances are available in 12 and 24V, but rarely 48V. 48V will run your Starlink directly though...

https://silodrome.com/ex-australian-army-unimogs-for-sale/

Dewalt sells 240V chargers outside the US, e.g. in Australia the charger part number is DCB115-XE vs DCB115 in the US. The US DCB115 manual says it requires 120V.

Each to his own - I think that interior is downright depressing. So dark and heavy - it would make me feel like I was incarcerated in a 19th century asylum.

I've got a similar setup - it's still a work in progress but the basics are up and running. I have five cameras so far, one dedicated low-mounted rear view camera displaying on a screen where the rear view mirror was (it records onto an SD card) 4 more high-mounted dome type security cameras...

Not Dan, but it's an artifact in the video. The lights are apparently being driven with pulses (perhaps PWM) at a rate too high to see with the naked eye, but the video frame rate is close enough to it to cause strobing.

The Samsung Galaxy Note devices are pretty good in sunlight and have a good size screen. The older units can be picked up cheaply. I use a Note 3 in a glider to run nav software and it's fine even in direct sunlight.

You could use two diodes, one from the ignition circuit to the device, the other from the house battery via a switch. Then it will come on if either the ignition is on or the switch is on. This part is a dual-diode package that will do the job, though it's extreme overkill in terms of current...