Search results

Tallest spot is in the rear above the shark fin @ 15"

I figured out a good option: Hitch pin lock, Master Lock 2847DAT. I cut it down to be the proper width.

It's gotten used several times, I just take care of my stuff. I buffed pinstripes out for an hour last week just before this picture. :)

Zero Rub without the spacers. With the spacers I had to use a heat gun and move the fender liner a little on the front inside. Only rubbed there at full lock. Spacers were added to restore the inch of track width that was lost when lifting the IFS. It made a very noticeable improvement in...

Let me know when you can share information and pictures, I would be quite interested.

Here is my RTT/Rack removal setup. It's much easier to just unbolt the 8 bolts holding the rack to the 4Runner and lift the whole assembly versus trying to unbolt the RTT from the rack. There is barely enough clearance to get a hand and ratcheting end wrench to the 12 bolts and the ergo's is...

Hey Cameron. I have 8' garage doors and have about 4" to spare. Fits just fine.

I just wanted to take a minute to share my progress, as I haven't done a dedicated post to the rig in it's completeness. She's ready to rock and roll for the summer! Done two shake down trips already and heading to Overland NW next weekend for a 4 day shakedown there. Pretty happy with how it...

Truck only had 500 miles on it, didn't even have a plate yet! Central Oregon.

This is not going to happen. There are some geographical differences out there but on a whole the Trail editions have too much demand on them to get that kind of deal. Toyota doesn't mark the cars up enough to get that high above dealer invoice on MSRP. If you can get within $250 of invoice...

I exchanged emails with Paul about this. Just phone your order in and he can take care of you. Just know that you need to remove the shark fin antenna on the back that is for the satellite radio. It will not affect your GPS navigation if you have it. The antenna for that is under the clock...

Dartman, your suggestion works just fine. You just remove the pinching lock tab from the lock and you now have a hole for a long hasp padlock or something like a trailer coupler latch lock. I am going to try this one and see how it goes. Too much bouncing around up there for a padlock. One...

Two mondays have passed...videos? Thanks!

Awesome explanation. I will look closely at that. I originally thought I wanted the Explorer but after opening and closing both and feeling how much harder it is to pull down the models designed to carry weight on them, it made me think hard if that was what I wanted. I am sure if you had...

I am 5'7", girlfriend is 5'4". PLENTY of room for us.

Thanks, I will give them a call. Looking at the latches I am not sure how it's possible. They must provide a different piece. Cheers, Keith

I picked up an Evasion this weekend. Pretty excited about it. I was curious if anyone figured out how to add a locking mechanism? It struck me as odd that there aren't any notches in the latches to add a small padlock or pin type lock. Any creative ideas out there or options that I missed...

I am confused, where are the videos?

Gobi?

Thats how you increase sales!