Search results

I installed the switch for my Llams height control module on the RH lower steering column "shroud", opposite the side where the electric column control is. There should be plenty of room there for a switch, easy enough to reach while driving and hidden from view in case you find an unsightly...

I vaguely remember when I used to think 2-week vacations were "short"... Then I moved to the US. :(

Jim, AFAIK the LR3 is not equipped with a BMS, so nothing to reset. Just swap battery and go.

Huh. Didn't get such error when I replaced mine. Try the routine again, if you get the same error send an email to the guys at Gap, they are normally very responsive. What model year LR4 do you own?

The function resets the BMS (battery monitoring system) module, which is built into the negative lead and monitors the battery's state of charge, current / voltage, quiescent drain. This information is sent to the rest of electronics to determine whether there is sufficient charge to perform...

There are (used to be I guess, since Rover Specialties is no longer manufacturing them) sliders for the Sport that follow the contour of the fins:

I don't have the exact numbers handy, but the difference in ground clearance, approach / departure / breakover angles between RRS and LR3/4 is really negligible. As I recall, the LR3/4 holds a slight advantage, but that is offset by the Sport's shorter wheelbase, which makes it a bit easier to...

Duplicate, sorry.

Unfortunately, Rover Specialties closed their business a couple of years ago or so. They aren't manufactured anymore AFAIK.

13 hours to get to the Mojave Desert... Did he have one burrito too many for lunch or something? Beautiful commercial, that's to be expected from Sinuhe. Just curious, where were the last scenes shot at? Looks like Soda Lake, maybe?

IIRC the wheel hub of LR3/4 and RRS is larger than the one on older Discos (even though the bolt pattern is the same), so that probably wouldn't work.

No, the factory LR 18" wheels off the LR3 will not clear the front Brembo calipers of the 2006-2009 Sport Supercharged, unfortunately. The Compomotive PD1880s - I think they have a new model # PD1881 as of early this year - will fit however (you may need to flip around the anti-resonate weights...

Even if you were only able to get 40-45mm of lift out of the GAP tool, I still would see no reason for adding rods, personally. I mean, that up/down button in the car still works after all, how often on a trail do you really need to be super-extended?

Land Rover Announces Discovery Sport This is the likely replacement for the LR2, a compact SUV due in 2015 with design cues and features from the above Discovery Vision Concept revealed in NY.

I think most of us are struck by how derivative the exterior design seems to be, that's all.

A Raised Air Intake?

I don't think there ever was a US distributor for Compomotive, even before the reorganization. You can import them directly from the UK - no difference other than the minor annoyance of the fluctuating foreign exchange rate affecting your delivered cost a few bucks up or down. You can pay by...

Duplicate post, sorry.

I have both, Llams and IIDTool BT. Honestly, for quick suspensions adjustments while driving, the simplicity of the Llams controller is hard to beat. Even if a diagnostic module like IIDTool eventually allowed you to adjust height with the vehicle moving, you would still need to leave the main...

Yes.