Search results

Pressure switch stops the compressor, manual fill sets the bag pressure. Air goes in, splits between the switches, and they diareubute the air Sent from my SM-G973U using Tapatalk

The switch stops it! I run a similar manual switch as idasho. Tank pressure on the switch inketz, fill bags to desired pressure Sent from my SM-G973U using Tapatalk

Yes, goes from compressor to switches in the cab to bags. Stinky air from deflating bags goes into cab. (I don't find myself deflating often....) but I do have one side that leaks down slowly. Filling (and seeing pressure) is handy from the cab Sent from my SM-G973U using Tapatalk

I have in cab on mine. Manual fill valves. Not a ton of complexity really. Sent from my SM-G973U using Tapatalk

FWIW I have the kelderman front only and am not real impressed. Sent from my SM-G973U using Tapatalk

Must be painted after welding/assembly, doesn't get into the tiny voids under brackets etc Sent from my SM-G973U using Tapatalk

Rust already? The brackets are held on by the unolts also. Sent from my SM-G973U using Tapatalk

Simple, I like it! But requires clearance above the drawer. In my application drawer would be nearly flush to the surface above. Sent from my SM-G973U using Tapatalk

That looks great! Nice work, I like the legs! Sent from my SM-G973U using Tapatalk

Wheels and tires with run flat is 216lb Sent from my SM-G973U using Tapatalk

I like the safety idea of them, less catastrophic in a blow out situation. But they are literally 60-80 lbs! That's a lot of rolling mass. Sent from my SM-G973U using Tapatalk

They are a rubber run flat yes. Sent from my SM-G973U using Tapatalk

These are milspec for flats from Mines etc I'd guess. About 60% of the tire height probably. Full of grease and nastynes. You could go quite a ways I would bet. But tire would be trashed Sent from my SM-G973U using Tapatalk

None of the 19.5 or 22.5 have the safety bead [emoji51] Sent from my SM-G973U using Tapatalk

As long as the beads are normal 19.5 profile I'll ditch them.... Looses almost 70lbs a wheel. Sent from my SM-G973U using Tapatalk

Yes I am debating loosing all of it. Not sure this is an easy wheel to find a regular beadlock insert for. Honestly never air down.... But I like the option if needed Sent from my SM-G973U using Tapatalk

Can I run without the inserts is my question? Or should I go find regular ones since these are stupid heavy? Sent from my SM-G973U using Tapatalk

It's toast. Good idea. May give me a thought on what's happening at the crack too. But I am more thinking of pulling them out of all the others. It's a ton of rotating weight. But.... I like the run flat as a super single rear also.... But not sure how much I should worry about blow outs Sent...

I extrapolated, but may have gone a little towards the low side? No, not used, just warehoused for 5 years before my purchase Sent from my SM-G973U using Tapatalk

That sounds like a really good way to lose some teeth. I might try it though, I want to see if there's signs of under-inflation on the inside of the carcass. Did anyone have opinions on what the bead area looks like? It looks very very similar to me. I'm wondering if I can run the tires without...