Search results

i just spoke with Victron USA, if your batteries are below 8-9v the inverter or charger will not work even if your hooked up to shore power. the inverter relies on there being power present in the batteries for the transfer switch to operate. He didnt have an exact number on hand for the low...

i just picked one up in 9mm Glock for when were out and about in the desert on minibikes. its the size of small laptop.

i havent looked this gun up in a while but if i remember correctly its late 1800's prior to when Daisy bought them out.

i got caught up in following the SOC and not the actual voltage. that wont happen again.

This past week I’ve been working on setting up the Battery monitor and color control panel so that everything’s reads the same but I’m not there yet so i inadvertently let the batteries drain. the battery monitor read 10.8v with 100% SOC, color control read 10.9v with 100% SOC and Voltmeter...

i take it you dont have a Sprinter? my van came with locking arms to hold the doors open and then magnets on the side of the van if you want them to open all the way.

i used stranded wire for everything except for the one AC outlet on the wall and the water pump. the 10g i used for the pump is run through the frame over the doors then down the pillar. the line for the AC outlet is only about 5'. i made sure everything was locked down nice an tight but in...

the back door was tricky to cut out because in the end the paneling doesnt sit flush with the handle trim so it will always look goofy. i did manage to cut it out on the first try but it didnt look right so i squared it off then went out an bought an access panel from Lowes and sprayed it...

First off, i would like to thank the forum, staff and the members here for their contributions and for taking the time to help people with their projects and adventures!! without places like this a lot of people would get lost or electrocuted. Goal here was to build multi use van that i...

this is interesting. cheaper then the bumper boxes. i could mount rotopax or something instead of the tire. upload a picture

i could do something like this but minus the tire.

i guess i could mount something like this under there. https://www.quadratec.com/p/smittybilt/heavy-duty-gas-can-mount-smittybilt-defender-racks?gclid=CjwKCAjw06LZBRBNEiwA2vgMVUMBFPtti9gU-n2aDNn7EgpmrE-FbalHJoZ1quZ9THx4ibsV5JeL7xoCq9IQAvD_BwE...

I have a sprinter van and would like to mount a Waiven 10L tank underneath the van. has anybody ever done something like this before? are there pre-made brackets available? I dont have access to a welder or anything but i could fabricate some angle iron with bolts etc etc. any other...

testing lights a few years ago prior to some winter truck camping. Coleman 200a if i remember correctly, Big beam and a Rayovak... uploading pictures

like any commercially sold product, will it work? YES. will it work for everybody? NO. that's how i look at this situation. i will be adding an off/off switch anyway. its simple enough and will put my mind at ease. I have a Victron battery monitor and color control panel so ill be able to see...

http://www.paladinarmory.com/newpage11.htm pictures upload

i like how these serbu look but theyre pricey for what they are. right around $1,100

unfortunately, i'm already heavily invested in the Redarc both mentally and $$$. sometimes im not sure which costs more.