Search results

I run a hellroaring combiner. It does work. https://hellroaring.com/index.php

I made one that has been on my CJ now now my TJ for about $20. 1/2" conduit that couples together (4 pieces about 3' long each) and three "sport utility" tarps ($5ea, they are tarp on one side and cloth on the other) in 5x7 size. A few lengths of paracord and 2 9" nails/stakes. You can get away...

The rigid leds I have use the deutsch connectors. That type of fitting is becoming very popular.

Independence day weekend up above Big Bear.............

Very nice! Did you make the spigot for the rotopax? CLEVER.

Beautiful CJ7!!!!

Very nice and well executed racks! Love the nessie easter egg!

I have a question about mppt/solar/vac. My proposed system I am building will comprise of 8)12vdc-45ah lifepo4 batts, 4) 235w panels in 24vdc output, a trace 4024 4k-24v inverter and a programmable MPPT controller. What is the best configuration to get the most out of those parameters? Can I go...

I build CNC machines and none of that makes any sense. re-running the "profile" again does not have any offset. I have a CNC plasma and oxy/fuel at my disposal all the time. I NEVER "walk away", it is the kiss of death when you do. CAD and CAM are two different languages, the interpreter...

if you use pushlock, make sure it is DOT rated, not really for compliance but the DOT stuff handles heat better, less problems around the exhaust, etc. I have three vehicles plumbed with pushlock, all work fine and it is super easy to work with and repair. 2gl air tank Viair installed but...

It's all in the "finish work", all good products require it. I will probably not deburr the edges. Just a good flap wheel overt he surface and on it goes. Not that I'm not wanting a good product, It just seems like MOLLE is tolerant to the square edge. If it seems like it is cutting or abrading...

That table has been around my shop for 20yrs, it was old when I got it. It is great for layout, always stable and flat. You have to move it with a forklift.

Here are a few more pics showing the overall build. I did not build the bumper or spindle. The Bumper feels solid and the swing out bearing was big.I added to it and modified. Here is one of my straps (30 footer) attached to the inner spare, I used a strap to keep in place. The inner...

Excellent, I was hoping someone with experience would drop in. Those are specs I'm looking for. I plan to cut out of sheet metal to mount inside truck beds for a few friends. So, the final "happy" spot for you was 1.300" X 1.180" While keeping same center line of 1.25x1? I work with AutoCad...

Does anyone have a molle pattern in a dxf or dwg file that can be cut and modified? I'm looking to cut out of 14ga or maybe 12ga and armor coat with a spray liner to put over head between A and B cage bars. I can modify, just looking for basic pattern that I can replicate. Any ideas??

I mounted the rack on the swingout and have done a little testing:

Ya, you would never believe I manufacture Automated weld machines. The truth is I don't weld small wire much. I have practiced more lately using less than 1/16" wire. I enjoy welding but spend most of my time drawing cad and cutting cnc plasma.

Well, Our trip to Calico is canceled. California just went on lock down. Boo. I was hoping to give the new rack a shake down this weekend but hotels and non-essential travel is a no go tonight. Here are some more pics: Getting ready for drilling I also redid my rotopax mounts, they were a...

Ok, V2 rack has been made. Not installed yet, I'll do that later tonight. I used thinner brackets and corners on this build, 14ga instead of 12ga, not mush but will be a little lighter. Upside down to attach top rail Spreaders double as tie down holders Settings seemed to play nice...

I found a new Pelican 24 soft cooler for $170 shipped to me. I pulled the trigger and should have it by next weekend. The footprint dimensions are 17"x10" (13" tall) and the ATC kit is 16"x12" (4" thick, but could expand if needed). Our Stanley 2gl water jug is 10" round. So based on those...