Search results

Thanks rayra but the trip is Saturday, I'm going into the city Friday and should be able to pick something up then. I picked up small track tonight from academy sports in the kayak section but they where out of ram ball mounts.

Packed my tool roll tonight. Its a Gary's tactical (Amazon) tool roll that is identical knock of of the Atlas 46. Unfortunately I couldn't see where it was worth $150, this one was $36. In the roll there is 2lb hammer, 3/8" & 1/2" breaker bars. The large flat pocket has large wrenches that...

I think the 315s would have rubbed.

I also picked up some amber lense covers for my ditch lights, the design flattens the pattern to work as fog lights. I think they would work better with flood beams instead of spots. I did have to modifying the covers with a torch to fit tight on the lights. They are for 3" cubes and...

Trying out the new tablet for photos and for navigating the forums I have some learning to do. First off the toolroll I just picked up holds 18 wrenches on the back, 4 large zippered pockets, and one very large but shallow pocket.

So I picked up a 8" tablet to use for gaia, what does everyone have to mount it to the dashboard? I kayak fish so I'm used to the ram systems.

That's one think I like about Texas....75 on two lanes where in Missouri its 55......Houston and Dallas at 95 was sketchy to me but I did it with everyone else. LOL

I've been driving it as much as possible just to try and work the bugs out before my trip, and found the lower radiator hose leaking due to reusing the old spring clamp easy cheap fix. No good pics of the sub yet but here it is.

Just for laughs....while hauling my tires home....my work truck looks like a chase truck.....

yeah I wanted to test it out when I first got mine so I went down the gravel road 2wd accel and then 4w auto accel its amazing how fast the auto kicks in and how smooth it does it.

pulled every thing back apart sprayed every thing down with brake cleaner regreased the pins and the nubs for the pads turns out I forgot to grease one of the pins...all is good now I drove it for an hour last night and every thing looks good no leaks not ticks no dragging brakes....my speedo is...

got it all back together and fired it up.....knock-knock-knock shut if off...… disconnected the plug for the coils.... pulled the fuel pump relay and cranked it over for about 3 minutes or so, reconnected everything and she fired up and purred like a kitten no knocks, smooth idle...blah...

Because its butt ugly!!!!LOL

nope I didn't leave it off the first time, yes I reused it but I made sure it was still pliable but yes I be leave it was sucking air, mine had a green O-ring, the new oil pump can with two black ones a skinny and fat...the timing cover gasket set came with three different ones, black skinny...

Started putting everything back together and got the crank shaft pulley and it says to tighten to 240 ft lbs with the old bolt, back it out and then tighten to 37 ft lbs + 140 degrees...I was curious to what that might be my torque wrench only goes up to 259 and at 259lbs I still have a little...

I do wish the suburban's had a drop down tailgate and a raise up glass....

So I've not got it back together yet but I do have the heater core T's on hand that you suggested when I did the knock sensors. Also I went through the synthetic problem I swapped it out within 1500miles of putting it in...I don't know if it made anymore leaks because the seals where already...

been working instead of posting....drove 40 minutes one way to pickup a spare wheel to match my oem ones only to find out it was a wheel from 95-99ish Silverado "close but no cigar" , then I dropped the wheels and tires off at the tire shop to get them swapped over, then onto try and get the...

once you get the cladding on you have to put vinyl on the rear side glass to make it look like the avi…. looking great!

another thing if you are considering doing the body work....don't try and overlap sheet metal get a pack of these body panel clips at HF.. they work great and put the proper spacing between the panels....also a brass spoon for welding will help too....I don't know if you know much about body...