Search results

That bag looks like it is out of alignment. Are both sides like that? Both GXV and Earthromer use King shocks wonder why?

With that amount on the front things should move easily. What was (before Kelderman) the front axle weight rating? Today I was comparing 2018-2019 F450PU and F450/F550 Cab and Chassis rear suspension parts. It is surprising how many parts are the same. Tomorrow l'll compare the front...

Back to the issue of a 100A fuse and a 130A alternator.

We are in the same boat. Looking at what can be done to F450/550 so we can used it for towing and a daily driver once we arrive at our destination. Some of the options being considered: Not sure about durability https://www.autoflexsuspensions.com/ Air ride for the cab...

I like Plan A (easy to trouble shoot) but I'd inquire with Victron as to adding a switch or relay to control a Cyrix

That how I would do it but I'm wondering what happens when solar is added? The Cyrix may need on/off from the ignition.

It won't suit your 130A alternator.......The maximum fuse rating is 100A (limiting charge current to approximately 80A).

There are chargers that can be programmed for one or the other but I do not know of one that will do both at the same time. A DC to DC charger is an option

FLA is 4 stage - Bulk - Absorb -Float - Equalize Lithium is 2 stage = Bulk - Float . . . . . and the voltage are different

If I'm not concernd with edge quality the I'll cut Phenolic with a band saw then soon after toss the blade in the garbage.

My friend was crossing the border on Wednesday. A SUV ahead of him was opened up that had 3 Jerry cans in the back and was sent into secondary . He had 3 Jerry cans tied down in the back of his pick up so he thought he was going into secondary as well but didn't have to. Comment was made...

What Verkstad said X2. A much better choice vs. polycarbonate I use carbide tooling on Phenoic with the exception of bi-metal hole saws and fine tooth jig saw blades. Cooling the blade from the back side with air makes the blades last longer. When using hole saws cooling with air and...

Plastic (nylon) shoulder washers is an option. https://www.zoro.com/zoro-select-shoulder-washer-nyl-14-in-pk40-24sw0250b/i/G3222633/

Quote from Dreadlocks - Post #11 "My SOC Monitor (Victron BMV-712) has a shunt that sits between the battery ground and everything else.. all grounds are hooked to a bus bar, thats hooked to shunt, and shunt is hooked to battery.. there is no path to the battery ground that does not pass through...

Tools or a surface that has been use prevoiusly with cutting fliud will transfer chemical that will cause the polycarbonate/Tufak/Lexan to crack. Fatiuge/stress cracking will happen if polycarbonate is bolted (best to clamp with cushion blocks) to/into a frame or equipment that is not...

Poor savings.....better off using PVC, HDPE or ABS board. Be disappointing going to all the work and have it crack. I've seen allot of cast/injected molded poly in electrical enclosures but in the 1-2 weeks I've been around electricity have never seen sheet used as a backing board.

Polycarbonate may crack around the holes while drilling and around the mounting holes if there isn't room for thermal expansion. Cracks may form around threaded fasteners Chemicals including adhesive stickers will cause solvent stress cracking. Easy to scratch.

Make sure the wire (NOT the inverter) is protected with the correct size fuse or breaker so if you forget or the next owner that doen't know uses it there won't be a fire.

Maybe coupling nuts and redi rod