Too bad Thuren doesn't list everything on their site. In this day and age, there should be no reason I need to call someone to find out about their products. Bad business IMHO. I have no problem calling a company to clarify something or a specific question but for general info about products...
Yeah, I really think a full pack to eliminate the factory blocks would be very good in the long run. If you read the fine print on the Carli 2nd gen springs, they say you lose 15% of load capacity. As of right now, the rockers on the cab are sitting level. That means I have dropped the rear...
Steering brace is a definite "to do" but I am still figuring out what I want to do with the supension. Honestly I really don't want to lift it much more, maybe an inch. All of the companies seem to make 3+ lifts and are more setup for the pre-running crowd, not the slide-in camper crowd. Add...
Not a whole lot to report. Changed all the FWC lighting to LED setups. Should help with power usage. Flushed the water tank and got the wiring done from the front batteries to the camper house battery.
Today, to help the ride, I removed the overload spring frame brackets. These brackets...
Scangauge II for the win!!!
I have actually reset codes on the trail. Later Cherokee's had a heat soak issue that can cause a temp misfire on startup and will throw a code. I like not having to look at the check engine light for the rest of the trip. Will allow me to see other codes and...
Okay... hummm... how about ex-military vehicles... don't own any of those do ya? Yeah, that's it. Damn, just noticed the Air Force bus... well I'm out of ideas. :D
BTW, I posted up a second price option with the original stock wheels versus the H2 wheels/tires.
Cool.
Yeah, I was thinking more about the corners than the bottom. If the bottom corner gets pushed upwards, the fender/hood would not allow this upward travel and I could see the grill shell cracking near the lights. Hopefully not an issue but something that could be.
No disrespect but curious why you make it flush to the grill shell? I know most all body on frame trucks have frame twist and I have seen the gap at the outside edge of the grill grow almost an 1" wider than at rest. The other side will typically close up that amount. That's why the factory...
The Nova Cool R2600 which almost the exact dimensions as my Norcold 323, yet has more interior space (2.4 cf vs. 1.7 cf) by not having the propane burner system, was $595 from a local vendor. The AC/DC version was about $150 more but I did some research and found I didn't need to have the AC...
Agreed, these 3 way fridges are for the park and connect to shore power crowds. I have just ordered a Nova Cool R2600 to replace my Norcold 323. Just getting the DC version as 99% of our camping is remote and the few times I might have shore power, it can run off the converter/battery.
Added...
Don't have any advice to fix your but these problems I continually hear about with these 3 way fridges is exactly why I am replacing mine with a DC unit that uses a compressor, like the Engel/ARB units. I found a Nova Cool fridge (R2600) that will replace my current Norcold 323 in the exact cut...
I would think if you are going to Callen Campers, they would have a method of getting it on and off. They have to put them on when someone comes in and buys one.
Now if you are planning to put it on and off at home, there are two typical ways. One is corner jacks but you'll need to have...
Will do Dave.
Today's task was getting the 12 volt plug setup installed so I can hook the camper battery to the truck charging system, so it will charge on the go. No pics but it went very well and I have everything hooked up.
Just picked up all of our gear out of the Kamparoo. Now we need...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.