Selling my Intech Pursue and planning on adding a topper to the bed of the Tacoma. GFC, Topo Topper, Snap Treehouse, all considered. Located in central NJ - willing to drive up to 12 hours for the right setup.
I wish Alu-cab made something between the Canopy Camper and their RTT, because I...
I'm listening.
About to sell my Intech Pursue and want to downsize to a wedge setup on my Tacoma but it's impossible to find anything that doesn't have a 24 month lead time or is less than $10k.
Might want to try some reflective foil insulation inside the tip-outs - it's something I see a lot of Explore owners do on the FB groups to keep thermal transfer at bay.
I have the Pursue (smaller, no tip out), and it's probably the same Dometic roof-top unit - and it'll cool the inside down to...
Elevated the bed tonight to give more underbed storage and also get the mattresses off of the floor of the trailer. Should keep us warmer in cold weather camping.
Here’s the exact bed I used: https://www.amazon.com/gp/product/B00IMWFKGW/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
Anyways, been a while since I checked in here. I’ve done a few trips here and there with the Pursue, slowly figuring out small tweaks and things to add or change.
The biggest change I’d like to make at some point is adding a propane forced air heater for camping off the grid in cooler...
First trip done and in the books.
Towed it down to a place on Rehoboth Bay in Delaware called Massey’s Landing. My parents and their friends are down there for the week, so I loaded up the slide-out kitchen with beer and snacks and went down for a quick overnight with the wife and dog...
Good to know. I’ll bring it up then, as it’s hitting the frame of the opening when it retracts.
Also, I found this loose pigtail last night when applying loctite to the lag bolts for the AC unit:
Any idea what it’s to/for? I’ve taped the end so I don’t have exposed wire but it feeds into...
Appreciate the tips - I'll have to go over some screws tomorrow morning, and check the tire pressures, too. I have noticed that my slide out seems to be slightly out of alignment, I may need to call Intech about that. Doesn't seem to close quite right.
Haven't had much of a chance to do much...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.