Search results

Im glad you liked it.

In this vid we taste some crazy Polish beers and test out a kinetic strap. YouTube - Rover Gear and a beer Cherry bomb

Maybe something like this ?? ;) YouTube - D2 CPS install

Yes sir it will.

Simon from X-Eng came over to join us on the Easter Expedition and he offered special pricing for a group buy on his X-Brake: http://www.lucky8llc.com/Products.aspx?ProductID=2089 This what Jonathan had to say after seeing the brake in action on the trip. "I was very impressed with one of the...

You could rework a stock switch to do that but you will need an ON / OFF switch like the fog switch. The some of the other switches are MOM ON/OFF. The difference is when you press the button in it stays down and the others just bounce back up.

Great place to look. Also if this connection is bad it can burn up the pump.

Here is a pic of the set up we have using KAM lockers. For the ARB I just put the compressor switch in the middle.

Exmoor has some news D1 retrim kits, these may be just the thing for you http://109.108.135.36.srvlist.ukfast.net/sites/allmakes/lucky8/index.php?option=com_virtuemart&page=shop.browse&category_id=123&Itemid=13&vmcchk=1&Itemid=13

Agree my friend. We will not do the trany service anymore in the shop I high milage trucks.

Jeremy I put my switches where the sunroof switches go. You could also use a Mud pod to fit and put them on the dash. Link to pod --- http://lucky8llc.com/Products.aspx?ProductID=3834 I would put the compressor in the back where the jump seats go if you dont have them or behind the trim pieces...

Fuel pump starting to go bad?

And tires

Mike It will bolt right in, it is the same for all D2s. If you have a RTE panhard it will not work for some reason Rover changed the bar on the 03/04s

I want to play too. 41% Panhard 34% king pin 18% tire 5% bearing 2% driver.

It is common to run the belt the wrong way. It needs to come straight down after the Alt if my memory serves me.

Did you swap in new pads. Dose the RRC have abs?

My first guess would be to look at the motor ground. You could run a new one from the bolt on the ALT to the neg of the bat

You found them for $1 each? Can you send me the link please

If you can not find them we have them.