Just talked to Roger who sold me the box and damn.. he had leak issue exactly the same even before taking all the lights off. He thought it was from the lights and is why removed them and put plates over the holes. He did silicone the plates he installed... just not the outside edge where...
Finally some good weather. Starting back to work on this toolbox on wheels and run into a snag. The benches inside have a good bit of water inside them. Could this be built up condensation? Leaks? The scene lights on the sides were removed and there is a metal plate covering them but I can...
when you look at wireless check any info you can on "delay". As in if you have a half second delay on placement of image on screen...... you need to know that if say your backing up to a trailer hitch for you may have smacked the trailer tongue while your dash screen still shows your 3" away...
On high up awnings (such as on side of roof rack) and the concern of not providing shade as sun lowers..... Once set up... would think you could clip to it a strip of cloth on the edge all the way across that hangs down.. foot or two? Should solve the sun angle disadvantage you got by...
Look forward to it's arrival. Thinking on starting with a bucket that dumps fecal matter into quart or 1/2 gallon paint cans along with shredded paper, grasses, leaves etc. Thinking to store sealed cans in a pvc pipe with vent up high to outside. Can's will be thrown into a fire to create...
hmmm.... is this offer equivilant to offering up some "grab asz" lol. Ok.... bad attempt at humor... guess I'll just stick with "yup' I'd be interested in the separating insert". PM me the details on how much $$ etc.
obviously you will loose some clarity..... thus amps...... but there is a way to fix it with Polyurithane. even fully shattered as you describe. Great for a project.
there is higher dollar (50 bucks?) Poly stuff that is said to work better.... and made specifically for this type repair...
which one is on top? confused by what you describe as "slides horizontally" Do these only slide out toward exterior? If so is there a separate fridge/freezer inside?
NO NO NO NO NO.... absolutely DO NOT DO THAT!!!!!!
Tapatalk host the pics..... they do not get attached to here at all..... Tapatalk is sneakly becoming the new photobucket without telling you that it is what it is doing. Guarantee you they will eventually hold your photos hostage and / or...
Keep me posted if your looking to move few of them or have info on where to get some more. I am installing a diesel coolant heater that will be used to both warm engine and for heating Ambo box. Ambo box will also be plumbed to use engine coolant for on the road heat as well, thus could use...
Your kidding right? If not.. totally matters your phone settings. Phones and tablets can take huge and high quality pics that create a very large file.
that photo was intended to be just a sample Idea .. it is a generic deflector NON solar. But one could probably build a non curved solar flat one to act as a deflector. Mount panel on a strong backboard behind with hinges and triangulated adjustable supports in the same way the generic deflector...
You can post pictures here.... just attach them to this board from your harddrive. you do not need a picture hosting site..... and if you had one... you should never use it for posting pics anyway.
Being your new here you may though need a few more post though before your allowed to "attach" a...
if you put it in the ceiling just make sure to set it up where the pump and hose path allows to drain back so no water is in it in the winter. Otherwise it will freeze.
Use the solar Panel as a wind deflector to attempt to improve mileage.
You can set this up to tilt to what ever degree you like, same as one above does. Sure picking best angle for wind deflection for aerodynamics to improve milage.... but when parked..... tilt it for aiming better aiming...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.