Search results

Still getting things situated here. Added a molle panel to hold tools that I’m often using. Decided to add the Victron Bluetooth dongle. I get all the information needed through a phone app now and you can make battery/charging adjustments. Cool stuff, just gets pricey quick.

Added a tailgate table.. I wasn’t sure this was going to fit based on the dimensions, but it just makes it.

That kind of irks me if they are manufacturing them in China. There's so much counterfeit Denso coming out of there that you have to be really careful. This is mostly with spark plugs, ignition coils, etc but that's not making it any easier. I went ahead and ordered a CSF 3237 Radiator. It...

I think that's what I always call a "Work in Progress".

I really want one that can display more info, but these are cheap and seem to work. Here's another option. Renogy makes one that looks interesting, but it's pricey. https://www.amazon.com/dp/B07B4CWKRJ

This looks like fun. ?

I don't think I posted this here yet. My Optima Yellowtop died after just about 8 years of hard use. I'm trying out an Autocraft Platinum AGM as a replacement. The same age Diehard Platinum I was using for my starting battery is still in great condition, so that's moving to the rear as the...

It seems to be working at displaying the battery load from the auxiliary fuse box. With the solar, I usually see a slight drop in voltage when I switch on a light or accessory. If there's not enough solar power, it shows watts/amps being used. It's wired to the battery negative, with the...

I recently changed out my single 100w Renogy panel for two of the newer compact 100w versions. I don't have a picture yet of the install, but I was able to get them both on the canopy. Decided to upgrade my charge controller to MPPT. The Morningstar PWM has been working great for the past seven...

Quit horsing around. :D

Yeah, I'll have to be careful but I don't often get into crazy places.

PM Sent. Thank you!

These have been sitting around and I don't think I'll be using them. I was going to use this setup to monitor my batteries. I took one meter out to test, hence the missing decal in the image below. Nice displays that light up with an initial "Blue Sea" logo. Sold. Thank you! $60 shipped will...

Uh oh.. :oops: Rigid Ignite flush mounted.. :unsure: They have a pretty good throw for a small flood light. Not the best picture at the moment.

Yep. Six rivnuts installed in some aluminum tubing under the headliner.

Testing out some accessories.

I think it'd be rock solid if there's a bend along the sides to keep the flex down. Some paracord handle replacements might look really cool with it.

That should be pretty awesome. I couldn't do much prototyping or test fitting and this was as simple a design I could think up. It still weights just shy of 10lbs.

Interested to see what you come up with. This one took a bit more work than most would want to deal with.

This was in the works for a while. I see people add these racks all over their vehicles, but I wanted one where it was actually accessible. I mounted several pieces of aluminum tubing between the headliner and roof to hold this in place. I got in touch with Orange Boxx Fabrication to make the...