well after having done it several times now and developed a system I would say an additinal 10 mutes if you are working alone. probably 5 if 2 people are working together.
The big time saver is packing the deluxe peaked side panels and front panel in the main bag and eliminting the all the...
Sounds like way to much drama for a small scratch to me. It is not even into the paint. You should be able to wet sand and at worst spray some fresh clear. No big deal
Well it's official, 11 days old and on the water. I thought I was going to have to kidnap my daughter to make it happen but Genevieve woke up today and said todays the day! So We got to the launch @ Sargeant Park for the Hillsborough river. After getting her in an infant jacket she was ready to...
16 gallons main 20 gallons in sceptor cans is good for about 720 highway miles in the Tacoma. figure 500 offroad if I do not let it idle while stopped.
As far as I know the camper was never made in Fiberglass. It was only a royalex canoe. If you can post a pic showing the interior with one including the ends I can tell you if it is or not.
If it is glass then you can lightly wet sand the gel coat and buff it out, that will help some. You can...
Well I got my jacket yesterday. I really like it. I Broke it in yesterday while out in a total Florida downpour. Unlike my retired trusty N.F. jacket the outer layer did not get saturated. The water just simply beaded up and rolled off. Even though it was 90 degrees, I was able to wear it for...
Well i finally got off my you know what and scored a jacket. Steep and cheap put out a Marmot Oracle jacket yesterday for a steel so I snagged one. I figure it was cheap enough to give it a try. Pit zips precip plus removable hood. Hoepfully it will breathe! I get it Thursday so I'll follow up...
I have 2 10x10 sil tarps and they work great. I aminly use then for paddling trips but they are great. If you want a good sil tarp go to cooke custom sewing. Dan's stuff is the best. cooke sewing tundra tarps
I started with the same drivetrain specs as you with my truck. I am running 255/85 and 4.88. Gearing is dead on. If you had an auto you would want to step up one ration. So if you are tires are 32" then I would go for a 4.56 unless you think you will step up in tire size. Do not waste time with...
Well another kayak of mine up for sale. This Impex Irie is a great light touring boat. Impex makes a very high quality fiberglass laminate. This one features a fiberglass rear bulkhead with hatch. Rudder and basic deck rigging. It has scratches on the deck from real world use but those can be...
If you have a 2.7 motor this is the largest tire you will want to run. I had 31" tires with 3.57 gears on mine before I lifted and geared. It was ok but 5th gear on the highway had nothing to offer and that was in Florida LOL! If you have a V-6 you will be good for sure. Ideally 4.10 would be best.
So I am thinking about finally getting "the knife". Over the years I have had alot of blades but I am ready to invest in a nice custom made knife to take me through the 2nd half of my life. I think I have decided on a Dan Foster Nessmuk interpretation. Blade will be 1/8"+ CPM 3V steel with a...
No epoxy will stick permanently poy is just low energy and flexible to accept a bond. Your best bet is to add the deck eyes off kayaks to the cup holders down low. This way you can tie down toward the bottom of the canoe. You can add them to the inside of the coaming as wel to anchor is storage...
after renting a JK in Puerto Rico Gen and I can say we finnaly like a Jeep LOL! I think if a flippac was available, we would have to purchase one just to get the flippac. That would be a great set up for an adventure vehicle, and allow the mortals to actually afford it.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.