Search results

Camp Box This is what I "upgraded" for my camp box. It is a bit smaller but I usually travel by myself and don't need a lot of kitchen utensils and etc. I built my carpet kit using the dims of the metal camp box and an Extreme cooler to both fit between the side boxes of the carpet kit...

Camp Box Here is a link that will give a better description of the camp box than I could ever hope to write. It was exactly what I was thinking though. http://www.cabelas.com/information/CampingFoodPrep/DoskocilSportCampMate.html

Cots have been sold, thanks for inquiring. I have two Handy Bed portable cots, in travel bags, that I no longer have a need for. Both are in excellent condition, have been used only in desert camping, never been wet. The Handy Bed uses a steel pipe frame and square tubing for legs, very...

Camp box has been sold. Thanks to all that responded. I have replaced my old camp box with a metal one so I have no use for the old one. It is in excellent condition, as new, asking $65.00.

Deaver In 1998 I was living in So Cal not to far from Deaver, I have a Wildernest Shell on a '98 Tacoma that I do not take off, with the camper and all the equipment for a trip I took the truck to Deaver. They jacked the rear up to the height I needed and manufactured the springs to get that...

A little more clearance Something I tried on my 98 Tacoma was to install a new set of springs that were approximately 30% heavier. I was able to gain about an inch to inch and a half in front height, enough to clear 32's without the pinch weld operation. I bought the springs from Valley...

I use a hi lift with a wide base and use my sliders as the jack point. My sliders are welded to the frame and placing the jack near the front, near the back or in the center will raise either the just the front, just the back or both front and back tires enough to clear a high center or fix two...

Great looking bumper, I have one quite similar which I had fabricated at a shop in Huntington Beach, CA when I in So CA. I had a pair of sliders welded to the frame and the bumper built for less than $700. I did have a serious problem with porpoising when driving at highway speeds because of...