05 Frontier sleeping platform/storage setup

stevet47 said:
Try fitting a 35gal. Action Packer in your KC without this mod! IMPOSSIBLE!
hi-lift003.jpg

Very cool! If I end up keeping my Frontier, I'll have to do something along those lines.
 
Nice work!:) Is there an access hole on the passenger side also? Is there a divider in the middle or just the hump?
 
BigAl said:
Nice work!:) Is there an access hole on the passenger side also? Is there a divider in the middle or just the hump?

Yep, a hole on both sides. Also, notice the 2 pull-tabs on the platform. If you pull them a ~10"x16" rectangle comes out so you can access the storage better. There is a divider in the middle separating the 2 compartments.
finsihed004.jpg
 
Thats been put on hold, so by the time it gets done, it could be anything. I'll probably just use MDF and roll and heavy coat of water sealer over it, but I suppose I could use something like corrugated plastic sheet.
 
mcm4090 said:
Any update?:coffee:
unfortunately no Mike, This has been put on the back burner. I am living in an apartment now where I don't have a place to work on the truck and the mod list is getting seriously backed up.
 
Irony alert!

The thread is about a sleeping platform . . . I think you can get rid of the apartment, sleep in the truck, and just rent a garage.

:)
 
stevet47 said:
unfortunately no Mike, This has been put on the back burner. I am living in an apartment now where I don't have a place to work on the truck and the mod list is getting seriously backed up.

You should see my work space! I have a 4ft wide sidewalk! that is not level! Besides, the truck bed is a good place.

Nice work on the interior storage.
 

Forum statistics

Threads
190,881
Messages
2,932,907
Members
234,698
Latest member
OchoSolo
Top