2.5 snorkle

[midwestracer]

so i bought this snorkle and it looks nice http://www.ebay.com/itm/350972529458?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
but didn't come with any template wondered if anybody had a idea on this or am i just going to have to wind it

 

[Toasty]

I will look for mine but I don't think I have it anymore

 

[jlocster]

I installed the same snorkel here ---> link Hopefully the pictures will give you some ideas. I made a template by taping paper onto the fender facing section of the snorkel and tracing the outline and marking the stud locations. It ended up working out fine. Be careful when fitting the snorkel to the airbox adapter. Be sure to cut the snorkel tailpiece and not the adapter itself to fit the snorkel flush with the face of the fender. I describe this in more detail in the link. That would be my only word of warning, that and just take the installation process slow.

 

[midwestracer]

toasty that would be awesome and jlocster thanks a bunch will read your thread in the morning

 

[midwestracer]

 

[nwoods]

That is a great looking Monty!