mccustomize
Explorer
So I think upon further inspection of the frame I am going to simplify the process of shortening it up. Since the cab mounts will need to stay in the same spot, and the front bed mount will need to as well, I am just going to move the spring hanger forward, the take 10 inches off the rear of the frame, drill new holes for the other bed mounts and that should work just fine.
There also lies a problem with the fuel tank, there is no way I can move the stock fuel tank 10 inches forward to shorten up the wheelbase, so I started comparing part numbers and such with no avail. Looks like a fuel cell might be in my future.