2006 LR3

Glapin

Member
It is with a heavy heart that I am selling my LR3.
2006 Land Rover LR3, 140,000 miles, meticulously maintained. No trades, no low balls, serious inquires only. Asking $9,800

I bought this vehicle in 2009 from Land Rover New Orleans, certified pre owned. I sold it to a friend while I lived overseas for 4.5 years and then purchased it back. I have done the coil conversion, replaced the lower control arms and replaced the entire cooling system, new radiator, water pump, all the hoses and belts. It has a Front Runner rack with tire mount and rear ladder and a Lucky8 front bumper with 8,500 lb winch with synthetic cable. I was also able to wire in a new Kenwood double din head unit with full Bluetooth capability and retain the steering wheel controls.
Service was originally done at Land Rover New Orleans and for the last few years Motorsports by Dallas, a European auto specialist. It has been all over the country and is extremely capable and reliable.

The issues, she has a cracked dashboard common with these years, a small tear in the drivers seat and a couple other nicks around the other seats/armrest, some of the headliner is delaminating. She throws the Rich/Lean fuel code occasionally, then it will go away, and then miraculously come back. She has been well used and has some trail rash on the body, minor pinstriping and a small rub mark on the passenger side door from a tree branch.


More things to list, call or text with questions.
Greg 985-377-3011
 

Attachments

  • 8F0A0AB4-0692-45C0-8DFA-CEF37D99EC5B.jpeg
    8F0A0AB4-0692-45C0-8DFA-CEF37D99EC5B.jpeg
    2.1 MB · Views: 206
  • 0B938EDE-0727-4BA0-B5C2-AE1843B05322.jpeg
    0B938EDE-0727-4BA0-B5C2-AE1843B05322.jpeg
    2.2 MB · Views: 206
  • D7305D7B-43B9-41FC-BFC7-905C7B7ACC93.jpeg
    D7305D7B-43B9-41FC-BFC7-905C7B7ACC93.jpeg
    2.1 MB · Views: 183
  • 08B85132-DD87-4A06-B0BA-4C1D15CCDE02.jpeg
    08B85132-DD87-4A06-B0BA-4C1D15CCDE02.jpeg
    1.9 MB · Views: 173
  • 97125B39-0245-4854-88B0-40653A492087.jpeg
    97125B39-0245-4854-88B0-40653A492087.jpeg
    2.5 MB · Views: 170
  • 7B647097-7CCB-4A07-B411-6F844CA66A80.jpeg
    7B647097-7CCB-4A07-B411-6F844CA66A80.jpeg
    2.2 MB · Views: 225
  • IMG_9348.jpg
    IMG_9348.jpg
    1.2 MB · Views: 230
  • IMG_9349.jpg
    IMG_9349.jpg
    884.3 KB · Views: 246
  • IMG_9350.jpg
    IMG_9350.jpg
    1.5 MB · Views: 246
  • IMG_9351.jpg
    IMG_9351.jpg
    1.3 MB · Views: 240
Last edited:

Glapin

Member
Any info on the rear bumper? Doesn’t look stock.


Sent from my iPhone using Tapatalk
Yes, I cut the factory cover with plans to build my own and a swing arm. I decided against it for now to keep the weight down. What you see is just the factory steel bumper that sits underneath the bumper cover.
 

Forum statistics

Threads
186,325
Messages
2,884,466
Members
226,200
Latest member
eclipse179
Top