Thank you! I was already sure I din't want to read the books or see the movie, but this definitely confirmed it. I laughed my butt off through the entire trailer.
I'm here to help...
2020 Ram 5500 DIY Composite Panel Camper Build Thread
- Thread starter RAM5500 CAMPERTHING
- Start date
I'm here to help...
38snubby
Active member
So this is the air controller Earthroamer uses. It is pretty cool...
www.airliftperformance.com
3H / 3P Height + Pressure Air Management System | Air Lift Performance
The all new air management system from Air Lift Performance uses both height and pressure sensors to provide the most innovative air suspension control ever.
Ninelitetrip
Well-known member
Another example is Baxter State Park. Dimension restriction is 9 x 7 x 22 on Park Loop road.
fullofdays
Wondering Wanderer
Great build. Can you clarify if you are running suspensionmaxx in the rear with the kelderman setup or just the kelderman rear and suspmaxx front?
RAM5500 CAMPERTHING
OG Portal Member #183
Been SUPER bummed out, and frustrated my panels are running a month behind schedule landing in the US, and my annual month long September trip is now cancelled because of it...
So I've been a bit deflated and un-motivated to continue all the work that still needs to be done.
But.... All my Victron bits are here, so i'll be able to hit the ground running when it gets here and with the help of some super talented friends, i might be able to salvage a week or 2 out of my vacation with some luck!
#fingerscrossed no more delays or hang ups.
So I've been a bit deflated and un-motivated to continue all the work that still needs to be done.
But.... All my Victron bits are here, so i'll be able to hit the ground running when it gets here and with the help of some super talented friends, i might be able to salvage a week or 2 out of my vacation with some luck!
#fingerscrossed no more delays or hang ups.
Last edited:
RAM5500 CAMPERTHING
OG Portal Member #183
Thanks.
No, i removed the suspension max stuff from the rear (just blocks, ubolts, and sway bar links), running Kelderman only in the rear, and still have the SuspensionMaxx up front.
Kelderman rides so damn nice, i might swap out the front too!
Will wait until its all assembled and see.
Last edited:
RAM5500 CAMPERTHING
OG Portal Member #183
So this is the air controller Earthroamer uses. It is pretty cool...
3H / 3P Height + Pressure Air Management System | Air Lift Performance
The all new air management system from Air Lift Performance uses both height and pressure sensors to provide the most innovative air suspension control ever.
yeah, I’m not doing any of that fancy pants stuff ?
RAM5500 CAMPERTHING
OG Portal Member #183
Working on some CAD (Cardboard Aided Design) layout ideas for my electrical layout
RAM5500 CAMPERTHING
OG Portal Member #183
Did you ever call them as I suggested?
Yeah, sorry, they are the 400-422
But that’s pretty irrelevant unless you’re running the identical setup
Ask that @java fella what happens when ya make assumptions and just order stuff without calling
RAM5500 CAMPERTHING
OG Portal Member #183
no bother at all, just giving you crap
if it’s the exact setup, should be good to go and quite suprised
pics of your setup?
java
Expedition Leader
Call them, he's really helpful! Called me at almost 10pm his time to get the right ones to me.
Sent from my SM-G973U using Tapatalk
Brad_UT
Well-known member
Haha. No worries at all. I'll get them ordered today.
Dealer says the truck should be here sometime around the end of September. Right now I'm just ordering all the parts and watching my bank balance drop like a friggin rock. The only thing I have remaining is the suspension setup. I'll do the Kelderman setup on the rear and I'd really like to use their front kit too, but I'm not sure how this will all work with a ~3" lift and axle moved 1" forward. And then there's the track bar/dop bracket issue. I need to give them a call to see what they recommend. Good times.
Dealer says the truck should be here sometime around the end of September. Right now I'm just ordering all the parts and watching my bank balance drop like a friggin rock.
The only thing I have remaining is the suspension setup. I'll do the Kelderman setup on the rear and I'd really like to use their front kit too, but I'm not sure how this will all work with a ~3" lift and axle moved 1" forward. And then there's the track bar/dop bracket issue. I need to give them a call to see what they recommend. Good times.
RAM5500 CAMPERTHING
OG Portal Member #183
Haha. No worries at all. I'll get them ordered today.
Dealer says the truck should be here sometime around the end of September. Right now I'm just ordering all the parts and watching my bank balance drop like a friggin rock.
I’m still doing some trial and error with the front.
Right now the rear is at stock height and I’d like to keep it there. I’m pretty sure I’ll be able to, or at least close to stock
DBL designs has a 2020 Ram they built with the MPT81s that they are clearing with NO LIFT, just fender trimming.
I’m going to mess around some more with the front and see what i can do.
I still haven’t figured out the track bar issue. The adjustable one I got from Dodge Offroad mostly fits but will need some modification to clear the top of the diff bolts at full compressed.
In a perfect scenario, I’d like to leave the axle 1” forward like it is, but remove the 3” spacer and run it at stock height.
that should fix the track bar issue, but I’m not sure how much more trimming I’ll need to do and how much more I really want to do.
Will find out soon enough I guess ?
Last edited: