4x4 7.3 Diesel E350 $26 000

[PontusJakobsson]

This truck is ready for your adventure!

4x4 converted with U-joint kit.
Upgraded transmission to manual.
High and low gear.

locking hubs in the front. 6-in lift with new suspension. Upgraded intercooler, and a 5-in down pipe. The engine have never been tuned.

This is the 7.3 diesel powerstroke engine the most sought after Ford engine ever built. 150 000 miles you can get it to run a million!

Custom front and back iron bumper with a 12,000 lb Warn winch. It will get you out of any trouble in the backcountry.

Rock sliders all around.

Obviously this thing is heavily modified, a lot of time I've been going into the front axle for a stable smooth straight running truck! It runs amazing on the highway, I would literally take you anywhere in the back country.

Lots of money time and love I've been going into this thing

$28 000

Boulder colorado

 

[XTRALND]

What year? Do you have more picture, exterior and interior? Who did the ujoint conversion? Do you have more pictures of the welds and the front end work?

 

[MadMax321]

Is that a coil front end?

 

[Gargermel]

This truck is ready for your adventure!

4x4 converted with U-joint kit.
Upgraded transmission to manual.
High and low gear.

locking hubs in the front. 6-in lift with new suspension. Upgraded intercooler, and a 5-in down pipe. The engine have never been tuned.

This is the 7.3 diesel powerstroke engine the most sought after Ford engine ever built. 150 000 miles you can get it to run a million!

Custom front and back iron bumper with a 12,000 lb Warn winch. It will get you out of any trouble in the backcountry.

Rock sliders all around.

Obviously this thing is heavily modified, a lot of time I've been going into the front axle for a stable smooth straight running truck! It runs amazing on the highway, I would literally take you anywhere in the back country.

Lots of money time and love I've been going into this thing

$28 000

Boulder colorado

What year, more photos and who did the conversion? interested in trade... I have a long travel tacoma im selling.

 

[nyyankees588]

OP said ujoint did 4x4 conversion, which use leaf sprung front-ends. 150k 7.3L 4x4 for $28k is a pretty solid asking price... Hard to find good condition 7.3Ls anymore. GLWS!

 

[MadMax321]

Pics look like a coil set up.

 

[MadMax321]

Also the sway bar mounts. I dont think Chris's stuff runs a swaybar with leafs

 

[brp]

U joint had a coil kit for a while.... Not sure if this is it though.

 

[MadMax321]

Interesting did not know that

 

[PontusJakobsson]

What year? Do you have more picture, exterior and interior? Who did the ujoint conversion? Do you have more pictures of the welds and the front end work?

The convertion was made from a company in colorado named Phatz Jeep