90rustymontero
New member
Hello everyone,
Doing part out for my SWB gen 1. Had a vehicle fire and ruined the engine and trans and front windshield (oil puked from transmission dipstick onto exhaust). The interior and most pieces of the suspension are good (brand new idler and pitman) along with good body pieces from the fenders back.
For sale:
Update: Forgot to include that the skidplates are available. This includes the front skid plate that protects the diff, the front driveshaft skidplate, gas tank skidplate, and transmission/xfer case skid plate.
1 week old Idler arm
1 week old Pitman
1 week old passenger cv axle
Gas tank and fuel pump assembly
1 year old Aisin FHM-002 manual locking hubs https://www.amazon.com/Aisin-FHM-002-Free-Wheel-Hub/dp/B00HFKEDVU
SWB driveshaft
factory rear LSD and axle
factory front open diff and axle
Gen 2 front rotors and calipers
ECU (incase you want to buy, will be having a friend test it before it is sold)
Gauge cluster
Working power window switches
power window motors
89 Intake w/ EGR (off of another 89 montero, sitting in my garage)
Harmonic balancer (not affected by fire)
Rear door latch (non-rusted)
rear window wiper motor
rear tail light lens and housings (good condition)
Curt class 3 trailer receiver (has the 4 bolt pattern, a factory fit)
Roof rack (needs repainted)
Flag mirrors
Bouncy seat
Dash switches and relays
I'll post more if I can think of anything else and I will send pictures if asked. If anyone is looking for a near perfect frame with an engine swap in mind, this would be a good project. I'll let the whole chassis and everything go for $500.00. Also has used BFG 33's.
If you are looking for something I didn't list, go ahead and ask. There's a good chance I forgot.
- 90rustymontero (Andrew)
You can also call me at (224)433-9345 if you want to discuss anything
Doing part out for my SWB gen 1. Had a vehicle fire and ruined the engine and trans and front windshield (oil puked from transmission dipstick onto exhaust). The interior and most pieces of the suspension are good (brand new idler and pitman) along with good body pieces from the fenders back.
For sale:
Update: Forgot to include that the skidplates are available. This includes the front skid plate that protects the diff, the front driveshaft skidplate, gas tank skidplate, and transmission/xfer case skid plate.
1 week old Idler arm
1 week old Pitman
1 week old passenger cv axle
Gas tank and fuel pump assembly
1 year old Aisin FHM-002 manual locking hubs https://www.amazon.com/Aisin-FHM-002-Free-Wheel-Hub/dp/B00HFKEDVU
SWB driveshaft
factory rear LSD and axle
factory front open diff and axle
Gen 2 front rotors and calipers
ECU (incase you want to buy, will be having a friend test it before it is sold)
Gauge cluster
Working power window switches
power window motors
89 Intake w/ EGR (off of another 89 montero, sitting in my garage)
Harmonic balancer (not affected by fire)
Rear door latch (non-rusted)
rear window wiper motor
rear tail light lens and housings (good condition)
Curt class 3 trailer receiver (has the 4 bolt pattern, a factory fit)
Roof rack (needs repainted)
Flag mirrors
Bouncy seat
Dash switches and relays
I'll post more if I can think of anything else and I will send pictures if asked. If anyone is looking for a near perfect frame with an engine swap in mind, this would be a good project. I'll let the whole chassis and everything go for $500.00. Also has used BFG 33's.
If you are looking for something I didn't list, go ahead and ask. There's a good chance I forgot.
- 90rustymontero (Andrew)
You can also call me at (224)433-9345 if you want to discuss anything
Last edited:
