97 Ford E350 Quigley and some quetions

[keeper]

Hi. I´m Marc from Germany and I drive a Ford 350 Quigley with the 7.3 Powerstroke engine, 60 front- 70 rearaxle. Perhaps you can help me by some
questions:
Which is the biggest tire size I can drive without installing a lift kit?
What kinds of lift kits are available and what do I have to change by installing them (Driving shaft for example)?
The front abs-sensors are not installed, i get some from a F-350 from the old owner....i heard something has to changed on them...

 

[keeper]

No one an idea?

 

[ujoint]

You can fit 285's with some fender trimming but you'll get confilcting answers on this. There's no easy way to lift a Quigley, no kits are available.

 

[keeper]

285/75/16 ?
I think I will only move the front axle a little bit forward to fit bigger tires. To high is a Problem with the legs of my wife, the´re to short :sombrero:

You can fit 285's with some fender trimming but you'll get confilcting answers on this. There's no easy way to lift a Quigley, no kits are available.

 

[Shocker]

265/75-16 should fit without a lift. Cooper ST MAXX for the win!

 

[cjken]

Yup I ran 286/75/16's on my original quigley.
I believe some run 305/70/r16 as well. A bit wider and close to the same height as the 285's

 

[keeper]

Ok, btw....does any Body knows "Crows Van 4x4"?

 

[ujoint]

Ok, btw....does any Body knows "Crows Van 4x4"?

Same as "javier"

 

[Frohagen]

I run 315's, but had to do some trimming. Probably downsize a hair if I did it again.

 

[keeper]

Same as "javier"

Any Homepage?

 

[keeper]

Does anyone knows about the Quigley ABS sensors at the front axle?

 

[BajaSportsmobile]

Does anyone knows about the Quigley ABS sensors at the front axle?

They are just the stock 2wd ABS units.

 

[keeper]

Thanks, i´ve got Sensors for a F-350 when i bought the van..

 

[BajaSportsmobile]

Thanks, i´ve got Sensors for a F-350 when i bought the van..

Well, you need to be more specific. What year Quigley with what axle?

 

[keeper]

1997 with a Ford 60 high Pinion.