Anyone got a spare LR3 LCA with a bad bushing?

[Blaise]

Guys,

I was in the process of replacing the front rearward LCA bushings on my LR3 with polyurethane ones but accidentally put a slot into the arm while removing the sleeve.

I now have an arm with a good ball joint, good forward bushing, new rear bushing... but bad metal. No cracking (yet) but still want to replace it.

Any chance anyone has a spare LCA that's good other than the rear lower bushing? Would be happy to cover shipping - seems like a waste of $150 to order a new one just to torch out the old bushing, etc.

Thanks!

 

[DVD]

I have a pile of control arms (replaced all 8 a year and 1/2 ago) on a pallet in the side yard in dry Arizona. But I started throwing them away just within the past month. I'm away from home for a couple days, but I can check over the weekend. Glad to send if you could use it. (Something like this is the reason why I put them on the pallet instead of throwing them away in the first place.)

 

[Victory_Overland]

Take it to a welder and have them bevel and weld the cut line! Sand it down and you're good to go. Probably be less than a $20 repair.