ARB 170201 fitting.

[HAFICON]

Anyone have a recommendation on an alternative for ARB fitting in he solenoids? Seems every so often I have one let lose hey average about $18 each with shipping. I looked into a standard compression fitting might try that route. Any alternative fixes please shout.

Part:
https://www.northridge4x4.com/part/...3QJLv1IBJ4fRImvYWllvoty0JlLi1slxoCl20QAvD_BwE

Optional: but would have to drill an tap the solenoid that is doable, and this should be fail safe.
https://www.amazon.com/Compression-Fitting-Stainless-Steel-Connector/dp/B07FZ88NM6

Thanks,
James
So I have bought a lot from this company but I do not see anything there. But just waned to share:
https://www.pneumadyne.com/

 

[IdaSHO]

So what threads does the fitting have?

Can you not just swap out the fitting at each end of the line for a more-standard (5mm... really??) air line fitting, like 4mm or 6mm?

Leave it to ARB to make a proprietary fitting

 

[IdaSHO]

Also, it does look like 5mm is available, just not as standard as 4 or 6mm, so the fitting availability is limited.

Grainger has a few options, like this one...

Again, need to know the thread size/type needed as well

https://www.grainger.com/product/AIGNEP-USA-5mm-Metal-Male-Adapter-1WUL2

Mcmaster-carr has some available as well

https://www.mcmaster.com/push-to-connect-tube-fittings

like this one...

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

 

[HAFICON]

Gonna look into that when I get home, the thread size is small but I don’t know right off. I may call ARB tomorrow ask them, for an easy solution I went ahead and ordered the ARB fitting also ordered the one I referenced see what I can make happen. No local places carry any compression fittings this small.

 

[TheGetLostTaco]

I purchased mine from an online store in the UK since ARB uses BSPT standards. Worked great. I did not pay rush shipping and received them in 5 business days and that is going to through US customs too.

Sent from my iPhone using Tapatalk Pro

 

[javajoe79]

If they are 1/8 bspt I would be inclined to replace them with a 1/8bspt to AN3 fitting and use AN lines to connect them. You’ll probably never have to deal with it again.