RockTaco02
New member
Budbuilt ifs skid as seen in the picture. Comes with the bracket that mounts to the steering rack as well as the hardware to mount it. You re-use the front (3) 12mm bolts from your factory splash pan. It has the (2) 5mm countersunk allen head bolts for the middle 2 holes and the (2) carriage bolts that mount to the steering rack bracket. Has been off-road a few times, but no unusual wear or major dings. I wouldn't recommend installing it onto a truck if your running stock struts up front it adds ~55 pounds. Hasn't been on my truck in probably a year plus (havent been able to wheel). I just sanded the whole thing down and put a few coats of rustoleum hammered black on it, It's wet in the picture from me hosing it down. I would keep it because it's stout as hell but i'm getting rid of my IFS and don't need it anymore.
Absolutely will not ship so don't even ask, a new one from bud would cost you $354+tax depending on where you live. I think 275$ is fair. No 2 frames are the same so I would recommended bringing the truck your going to put it on to make sure all the holes line up. If I'm not busy and in a good mood I might even install it for you. located in southern California, pasadena area.
-Matt
Absolutely will not ship so don't even ask, a new one from bud would cost you $354+tax depending on where you live. I think 275$ is fair. No 2 frames are the same so I would recommended bringing the truck your going to put it on to make sure all the holes line up. If I'm not busy and in a good mood I might even install it for you. located in southern California, pasadena area.
-Matt
Last edited: