Bigger engines that are mildly worked seem to suffer less of a mpg penalty than smaller engines which are overworked. The 4.0l v6 in the 4runner and Tacoma is a reliable workhorse, but its mpg suffers quite a bit when put to work. It is what it is. At least the engine will keep on going, even if you need to refuel it frequently.
Yeah, you have to ring its' fricken neck to get any power of them when pulling loads...mpg's take a nose dive. Where a bigger engine just lopes along.
While I like the Tacoma and the 4Runner, even though the shine has worn off from the brand for me...not sure if I would call them workhorses...since payload and towing is so low. Maybe ultra reliable weekend warriors?
Perhaps Toyota gets all the fan fair, but I never really hear too many complaints about the gasser engines from the big three. (or maybe I just don't pay attention???)
While the engine is still going strong in mine getting ready to roll 368K (which I think is impressive) I have darn near rebuilt just about everything else under the truck the last 4 years, have to put about $1500-2000 a year to keep it going...just put in its' 2nd aftermarket Rack & Pinion last week and a cam shaft seal. The rack itself was still good, had a little play on an inner tierod...so I replaced everything including outer tierods since it was all apart. Still getting a little play in the steering which is coming from the slip joint in the steering column that I need to tack weld, but don't feel like messing with it right now. Riding conditions are primo out there, rather be riding the dirt bike. Than more BS truck maintenance.
Yes these trucks are reliable...to a point, then they start nickel and diming you.