Electrical Wire Identification - What the heck are these plugs?

[SONICMASD]

Hi Guys,

When I removed my knee guard trim below the dash I noticed a few wires that are not plugged in.

#1. 4 pin square connector, that plugs in to a large metal box just above the left front speaker, just to the left and in front of the power window relay board. This same box has 2 other wire harnesses already plugged into it.



#2. 2 prong connector, way in the back, right next to the power window relay, just above the hood release cable



#3. Green tipped connector from a cord that has a fabric coating on the outside, unlike the normal rubber/insulated coatings.

#4. Female plug with a yellow sticker that says "INSTALL FUSE HERE".



I have been unable to ID these in the FSM so fingers crossed someone here knows what they are.

 

[Sabre]

No idea, but every vehicle has stuff like that. One wiring harness for several trim levels and such.

 

[Toasty]

Looks like Code Alarm BS

 

[Toasty]

LT can confirm if he posts up.

 

[jlocster]

Like Toasty said most likely alarm wiring. This may help ---> link

The metal box behind the speaker is the alarm module

If your Gen 2 is wired like the Gen 2.5s the 4 prong plug connector is the motion sensor.

 

[SONICMASD]

Many thanks!


Sent from my iPhone using Tapatalk