Ex-Cal Fire 2001 Ram 1500

jimjam300

New member
d9dfd73cc858af9a12875e69e01d3b6f.jpg

ef9da004553f1bcb81943b4c9fa5250f.jpg

(This was not my truck, but it's identical)

-5.2L V8
-Automatic transmission
-Options are 4WD, Club Cab, Dana Trac-Lok rear LSD, and transmission skid plate

My upgrades:
-3" front Skyjacker springs
-1.5" rear add-a-leaf
-Rancho RS7MT shocks
-255/75/17 Yokohama Geolander G003 MTs
-3rd Gen 17" wheels
-4.10 gears
-Eaton TrueTrac LSD front/rear
-JKS sway bar disconnects
-Stryker adjustable control arms
-Benny's 4x4 winch bumper
-Badland Apex 12000 winch
-V10 radiator
-fiberglass fuel tank skid plate
-dual 10" subwoofers
-Posi-Lock cable center axle disconnect


This thing started out life in the service of Cal Fire (California's state fire department), which ended in 2017 with 255k miles. It went through a couple of owners who were insistent on running it into the ground. I bought it in '21 just for hauling stuff around to wait out used auto prices and decided after fixing up a few things, it was perfectly fine to keep around. It's currently at 291k miles.

I went camping with it around Carson Pass on 4th of July weekend '23 and encountered some mud and snow that really hampered by ability to go around and explore that would've been a piece of cake if I had better tires and ground clearance. I decided I already had a good vehicle and I started building early '24.
d85a9dcdd329aab57b18944f49ab80d6.jpg

21a0f0c55118ff1af7f52c433993b67c.jpg


Haven't done much with it since I bought a house a few months ago, but I did bring it to the Gambler 500 in Oregon this year where I thought I would recover some beaters, but only ended up towing a blown up 22RE Toyota truck to the owner's campsite.
e8ed5402bff845fa578c56a095ae090a.jpg

34b9e1e7270ef312adf658d3b679b74d.jpg

699aa24401c741059f4913d6535486e3.jpg


Ditched the cheap fiberglass shell and got a SoftTopper last week.
cf4e7fcc13964d24e4292dbbff6197a0.jpg


My plan for the future is to swap out the wheels and tires. I decided I don't like the mud terrains so I'm gonna try to figure out some 35" AT pizza cutters on some high offset 16 or 17" wheels and plastic fender flares to keep them from being outside the body. I am gonna try to find some used ~99" rock sliders to weld on when I can. Probably not gonna do much more than that, as I still use the truck for yard and house work.

I think later this month I'm gonna head back to the Sierra and hit some trails for camping before the snow comes in.


Sent from my iPhone using Tapatalk
 

Forum statistics

Threads
190,315
Messages
2,926,263
Members
233,711
Latest member
DanoWall
Top