Flatbed campers by TotalComposites

[Victorian]

6.5’ off to its new home ? sooo many more to come!

 

[CuStOm]

@Victorian Do you happen to have any details on that flatbed?

 

[Victorian]

@Victorian Do you happen to have any details on that flatbed?

Nope. Sorry.

 

[Jonnyo]

6.5’ off to its new home ? sooo many more to come!
View attachment 718693

when building one of those, how many tubes of glue is needed to complete the project? i need to get on ordering!

 

[Victorian]

when building one of those, how many tubes of glue is needed to complete the project? i need to get on ordering!

you don’t have to worry about the assembly. We do that for you. All you need to do is the interior.
cheers

 

[Victorian]

Overland adventure trucks is pumping them out! ?

 

[Victorian]

prototype almost ready to be shown at the bc overland rally.

 

[1stGen]

6.5’ off to its new home ? sooo many more to come!
View attachment 718693

Are those trusses required for the longer cabover on the flatbeds? I notice some of them have them and some of them don't.

 

[Victorian]

Are those trusses required for the longer cabover on the flatbeds? I notice some of them have them and some of them don't.

They are not required. But some customers like them for looks.

 

[Ninelitetrip]

prototype almost ready to be shown at the bc overland rally.

@Victorian

Any updates, or photos on the Pagoda?

 

[Ninelitetrip]

As for the weights: Our engineers calculated roughly 400kg +/- 50kg (glue, accessories...) This includes structure in the rear wall that will allow mounting of spare tires and other accessories. At the same time, the internal structure can be cut to fit a door in the rear wall or the sidewall. Again, it comes down to maximum flexibility for the end user.

@Victorian

Have you determined what the max weight capacity off the back panel would be? Comparison say to the OEV rear setups with spare tire, ladder to roof, Molle panels, storage boxes?

 

[Victorian]

@Victorian

Have you determined what the max weight capacity off the back panel would be? Comparison say to the OEV rear setups with spare tire, ladder to roof, Molle panels, storage boxes?

For the flatbed campers without departure angle we have a 300kg/~600lb rating. With departure angle it’s reduced to 250kg/~500lb . In both case it’s important to remember that point loads should be avoided and some type of base rack should be used to spread the load.

 

[Victorian]

@Victorian

Any updates, or photos on the Pagoda?

This was really just a one off.

 

[Ninelitetrip]

This was really just a one off.

So strictly a custom order, not in the product lineup, so to speak?

 

[Victorian]

So strictly a custom order, not in the product lineup, so to speak?

Not off the shelf for sure. Our partners can still order them as a custom build.