Forscan Dedicated Forum

[Betarocker]

You can change easily up to 35" ish diameter. Couple clicks and write. Then you'll need to sync the transmission to match. Larger diameter requires changing the Hex value. I haven't done it yet as I only recently re-found the spread sheet that has the converter from metric tire size to hex code.

 

[Atl-atl]

In for this discussion. I need to adjust the speedo on my RV. I already have Forscan and got a cheap tablet to run it. Only hooked it up and used it one time and didnt know how to do much.

 

[Christian P.]

I don't know if there is enough interest to have its own dedicated forum. Perhaps a sticky thread under the Ford section?

 

[dave1014]

Anyone have any experience with Forscan Lite for iOS? It’s available for use with my OBDPlus MX+ reader but I’m not clear what additional functionality it provides.

Forscan Lite allows for code pulling and some basic diag tests. You cant make programming changes with it. But its much better than most basic phone apps

 

[dave1014]

Can you still get Forscan? I thought the sanctions on Russia were causing issues with it?

Its available again

 

[Trail Talk]

Forscan Lite allows for code pulling and some basic diag tests. You cant make programming changes with it. But its much better than most basic phone apps

Have you tried the MX+, how does it compare?

 

[Macfly]

I'd love to find an expert here in LA, I have x4 warnings that come on every time I turn on the ignition for things I've removed from the truck, it's such a pain having to 'ok' them every time!

 

[mwslaughter]

I'd love to find an expert here in LA, I have x4 warnings that come on every time I turn on the ignition for things I've removed from the truck, it's such a pain having to 'ok' them every time!

You should consider purchasing one of the units, they are cheap. Hopefully someone on this forum can walk you through disabling all the warnings. It comes with a free 2 month subscription which is plenty of time to do what you need, though the signup process is clumsy, it does work.

 

[Macfly]

Is it OSX / Mac compatible?

 

[mwslaughter]

Supported Operating Systems: XP, Vista, 7, 8, 10, ELM327