Depending on what accessories your looking at some of them "bolt on" easier than others. We do a lot of Front Runner & Rhino Racks in the shop and thus we often end up modifying accessories from FRO to fit on the Rhino Racks. The problem with a lot of the cross-compatibility is that all FRO racks have slats that run perpendicular with the vehicle, while Rhino Rack runs parallel so the spacing doesn't work out. Also, if its an accessory from FRO that is meant to mount on the perimeter of the rack it will not be compatible with the Rhino Rack.
If you'll let me know what accessories your considering I might be able to offer a little more help and insight.
Matt
Exploration Outfitters
Depending on what accessories your looking at some of them "bolt on" easier than others. We do a lot of Front Runner & Rhino Racks in the shop and thus we often end up modifying accessories from FRO to fit on the Rhino Racks. The problem with a lot of the cross-compatibility is that all FRO racks have slats that run perpendicular with the vehicle, while Rhino Rack runs parallel so the spacing doesn't work out. Also, if its an accessory from FRO that is meant to mount on the perimeter of the rack it will not be compatible with the Rhino Rack.
If you'll let me know what accessories your considering I might be able to offer a little more help and insight.
Matt
Exploration Outfitters
I'm in the same boat: I have a rhinorack with JB RTT and I'd like to see if i can modify the FRO table slide to work under my RhinoRack. I'm not particularly optimistic due to the low profile, different rack mfr.. and even if I could get it to work, I'd have to take the RTT off to mount it.
Still haven't heard anything.. I may go rogue and create my own solution. There's a fair amount of dead space under my pioneer platform.
View attachment 425416
I'm thinking of doing something similar for my own MaxTrax. I find that the bulk of my dislike of the current setup (laying flat on the roof rack) is the need to unbolt the MaxTrax in four locations (each corner) and take off a lock - it's a hassle. Being able to simply slide them in somewhere and slam a single latch/lock would be much better. I'm considering replicating the FRO table slides for the MaxTrax, but am also thinking about building a simple box-style enclosure and storing them in that.
Reviving an old thread here, I have rhino pioneer platform with JB tent, and was thinking about using FR telescopic ladder and brackets instead the included JB ladder. Would those brackets fit onto the Rhino pioneer platform?
I would like to see if anyone has done this also, or I may just make my own.I know this is a very old thread, but did anyone ever find a way to mount a camp table under their rhino rack pioneer platform?
I would like to see if anyone has done this also, or I may just make my own.