dyogim
Explorer
Bought this transfer case from another member for $100. Only asking what I paid for. Shipping is on you. Not sure what year this came out of. I was going to install this into my tundra but, had another transfer case from another taco I used.
When I got this transfer case, the shift lever was bent and I noticed a few very small metal shavings. I tore it down and found that one of the "dog bones" had been dislodged. I ordered a new set of dog bones installed everything back together and used gray RTV sealeant. Does not have the 23 spline coupler for the input shaft, the driveshaft flanges or the 4HI/4LO sensors. I'll have to look for the driveshaft flanges if you need them. This has been sitting on my work bench since Aug. I thought of keeping as a spare but, now I just want it out.
When I got this transfer case, the shift lever was bent and I noticed a few very small metal shavings. I tore it down and found that one of the "dog bones" had been dislodged. I ordered a new set of dog bones installed everything back together and used gray RTV sealeant. Does not have the 23 spline coupler for the input shaft, the driveshaft flanges or the 4HI/4LO sensors. I'll have to look for the driveshaft flanges if you need them. This has been sitting on my work bench since Aug. I thought of keeping as a spare but, now I just want it out.