I removed the current injectors from my gen 3, I think one or two are shot and are not closing properly plus they all need cleaning too, the injectors are Denso 195500-4370, however, searching online (especially on aliexpress) reveals that the Denso part is just a rebrand of chinese made injectors? Am I correct or are the ones on aliexpress knockoffs of the Denso ones? They share the same part numbers. Any advice on this topic would be helpful. Thanks.
Fuel injectors selection for Gen 3 montero?
- Thread starter vfx_vish
- Start date
ChrisCosta416
Well-known member
The aliexpress are knock off ones.
You can have your injectors rebuilt of spend some money on Genuine Densos from rockauto. Most other Denso items on ebay or sites like aliexpress are fake.
You can have your injectors rebuilt of spend some money on Genuine Densos from rockauto. Most other Denso items on ebay or sites like aliexpress are fake.
MontySquareo
Active member
Are the Chinese injectors any good? I plan to do injectors on my 3.5 gen 3
ChrisCosta416
Well-known member
Doubt it. Use quality parts especially when it comes to things that are hard to get too and time consuming to install. Do you want your injectors to fail when you are out on the trail?
The Denso injectors were chosen by the mfg and lasted a long time already.
Get the OEM Injectors rebuilt.
MontySquareo
Active member
I found rebuild kits online for like 30 bucks. (filter screen, orings, ect.) I think I might try rebuilding my own injectors, I just have to make some kind of flow tester, and if they flow different ill just buy new ones.
ChrisCosta416
Well-known member
RC Injectors in Torrance, CA rebuilds and tests your OEM ones for about 100-200$ I belive. They have a good turn around too!