El Solis
Adventurer
So I wanted to have power in the back of the CT but also didn't want a bunch of sloppy wires zip tied to the roll cage so I started a project to clean up the wiring and provide for a fused system that was expandable in the future. Here is what I came up with.
Ran welding cable from a circuit breaker in the battery box. Power all from secondary battery. Entered the rear cargo area and hooked into power distribution blocks. This way the compressor has a nice clean feed of 2/0 gauge wire and then off to the "fuse box"
![ImageUploadedByTapatalk1360650374.938384.jpg ImageUploadedByTapatalk1360650374.938384.jpg](https://expeditionportal.com/forum/data/attachments/101/101029-99f82742060dcbc079989308a3f83fda.jpg)
![ImageUploadedByTapatalk1360650388.392114.jpg ImageUploadedByTapatalk1360650388.392114.jpg](https://expeditionportal.com/forum/data/attachments/101/101031-f6803fb3906a00304c2dfc320994e6c8.jpg)
I then used bulkhead glans to create a waterproof in/out to a pelican box.
![ImageUploadedByTapatalk1360650443.756811.jpg ImageUploadedByTapatalk1360650443.756811.jpg](https://expeditionportal.com/forum/data/attachments/101/101034-f77aa8d8304981a4972de4aeccead85d.jpg)
![ImageUploadedByTapatalk1360650458.703562.jpg ImageUploadedByTapatalk1360650458.703562.jpg](https://expeditionportal.com/forum/data/attachments/101/101035-488d821f371bce03a557525c2af3d33e.jpg)
![ImageUploadedByTapatalk1360650472.754895.jpg ImageUploadedByTapatalk1360650472.754895.jpg](https://expeditionportal.com/forum/data/attachments/101/101036-e733a2814cb81684d50f6c4ffd3e1547.jpg)
These connect to a blue sea 12 station fuse box.![ImageUploadedByTapatalk1360650504.325530.jpg ImageUploadedByTapatalk1360650504.325530.jpg](https://expeditionportal.com/forum/data/attachments/101/101037-d3d4a5d22995660d59bfb81bb83a375c.jpg)
![ImageUploadedByTapatalk1360650534.620219.jpg ImageUploadedByTapatalk1360650534.620219.jpg](https://expeditionportal.com/forum/data/attachments/101/101038-87f9ecf8f88d9606803e46119b3b25d8.jpg)
I also have the relays for the rear work lights in here.
Then out to the devices that need power. This will allow for fused power with each device on its own circuit. Also allows to easily add a circuit.
Since the box is tucked away I wanted to be able to access it easily so waterproof quick disconnects were put in place out side of the box, all hidden behind the box when installed.
![ImageUploadedByTapatalk1360650602.105363.jpg ImageUploadedByTapatalk1360650602.105363.jpg](https://expeditionportal.com/forum/data/attachments/101/101039-bdc664df4d87fb67c463cd9da976956d.jpg)
![ImageUploadedByTapatalk1360650623.440478.jpg ImageUploadedByTapatalk1360650623.440478.jpg](https://expeditionportal.com/forum/data/attachments/101/101042-709b7451771658a9e7093011e8763ab2.jpg)
![ImageUploadedByTapatalk1360650641.322397.jpg ImageUploadedByTapatalk1360650641.322397.jpg](https://expeditionportal.com/forum/data/attachments/101/101043-152a0473da3cad07eb0ca06f248eb2e5.jpg)
Con't
Ran welding cable from a circuit breaker in the battery box. Power all from secondary battery. Entered the rear cargo area and hooked into power distribution blocks. This way the compressor has a nice clean feed of 2/0 gauge wire and then off to the "fuse box"
![ImageUploadedByTapatalk1360650374.938384.jpg ImageUploadedByTapatalk1360650374.938384.jpg](https://expeditionportal.com/forum/data/attachments/101/101029-99f82742060dcbc079989308a3f83fda.jpg)
![ImageUploadedByTapatalk1360650388.392114.jpg ImageUploadedByTapatalk1360650388.392114.jpg](https://expeditionportal.com/forum/data/attachments/101/101031-f6803fb3906a00304c2dfc320994e6c8.jpg)
I then used bulkhead glans to create a waterproof in/out to a pelican box.
![ImageUploadedByTapatalk1360650443.756811.jpg ImageUploadedByTapatalk1360650443.756811.jpg](https://expeditionportal.com/forum/data/attachments/101/101034-f77aa8d8304981a4972de4aeccead85d.jpg)
![ImageUploadedByTapatalk1360650458.703562.jpg ImageUploadedByTapatalk1360650458.703562.jpg](https://expeditionportal.com/forum/data/attachments/101/101035-488d821f371bce03a557525c2af3d33e.jpg)
![ImageUploadedByTapatalk1360650472.754895.jpg ImageUploadedByTapatalk1360650472.754895.jpg](https://expeditionportal.com/forum/data/attachments/101/101036-e733a2814cb81684d50f6c4ffd3e1547.jpg)
These connect to a blue sea 12 station fuse box.
![ImageUploadedByTapatalk1360650504.325530.jpg ImageUploadedByTapatalk1360650504.325530.jpg](https://expeditionportal.com/forum/data/attachments/101/101037-d3d4a5d22995660d59bfb81bb83a375c.jpg)
![ImageUploadedByTapatalk1360650534.620219.jpg ImageUploadedByTapatalk1360650534.620219.jpg](https://expeditionportal.com/forum/data/attachments/101/101038-87f9ecf8f88d9606803e46119b3b25d8.jpg)
I also have the relays for the rear work lights in here.
Then out to the devices that need power. This will allow for fused power with each device on its own circuit. Also allows to easily add a circuit.
Since the box is tucked away I wanted to be able to access it easily so waterproof quick disconnects were put in place out side of the box, all hidden behind the box when installed.
![ImageUploadedByTapatalk1360650602.105363.jpg ImageUploadedByTapatalk1360650602.105363.jpg](https://expeditionportal.com/forum/data/attachments/101/101039-bdc664df4d87fb67c463cd9da976956d.jpg)
![ImageUploadedByTapatalk1360650623.440478.jpg ImageUploadedByTapatalk1360650623.440478.jpg](https://expeditionportal.com/forum/data/attachments/101/101042-709b7451771658a9e7093011e8763ab2.jpg)
![ImageUploadedByTapatalk1360650641.322397.jpg ImageUploadedByTapatalk1360650641.322397.jpg](https://expeditionportal.com/forum/data/attachments/101/101043-152a0473da3cad07eb0ca06f248eb2e5.jpg)
Con't