Hodakaguy's 4x4 Sprinter Build

Hodakaguy

Adventurer
Continued from above...

P7303119-X2.jpg


P7303100-X2.jpg


P7303123-X2.jpg



Next we left Wallace and headed about 7 miles out of town to the ghost town of Burke ID. Burke was one of the largest producers of silver, zinc and lead. Look up Burke on youtube for some really cool history.

Burke back in the day.....

P7303066-X2.jpg



Today little is left except small ruins, you would never know how massive this place really was.

P7303134-X2.jpg


P7303136-X2.jpg


P7303171-X2.jpg


P7303177-X2.jpg


P7303180-X2.jpg


P7303187-X2.jpg



Massive head frame in the background.

P7303192-X2.jpg


P7303193-X2.jpg


What's left of the Frisco Mill. During a battle between the miners and the mill owners the miners placed explosives in a mine cart above the mill and sent the cart down the tracks into the mill, completely destroying the mill.

P7303211-X2.jpg


P7303198-X2.jpg



Shot from the Drone

DJI_0003-X2.jpg



Stopped at the 50,000 silver dollar store in Montana. Just cheap tourist stuff here but kinda cool to check out.

20200730_163551-X2.jpg



Using the Biolite grill to cook up some steaks for dinner...yummm

IMG_4908-X2.jpg


20200730_185819-X2.jpg


My wife enjoying the trip....

20200730_194305-X2.jpg



Continued Below....
 

Hodakaguy

Adventurer
Continued from above...

Dad setting up camp...takes all of about 2 minutes. The Vagabond Drifter is a slick setup!

20200730_195805-X2.jpg



Next we stopped in Missoula MT....Ehh...just a big city and we weren't to impressed so didn't spend much time here.

P7313228-X2.jpg



Back on the road and heading south towards the Salmon river. Several cool towns to stop and explore along the way.

P7313273-X2.jpg


P7313300-X2.jpg


P7313306-X2.jpg



Stickers on entering state signs must be a thing now :)

P7313318-X2.jpg


P7313319-X2.jpg


P7313332-X2.jpg


P7313329-X2.jpg



Lots of beautiful scenery along the way.

P7313355-X2.jpg


P7313361-X2.jpg



Found a great free camp site right on the Salmon river...soooo nice! While we were camped here a park ranger stopped by to chat and we told him that we were heading to the Yankee Fork gold dredge and the ghost town of Custer ID. He told us that there is a historic dirt road called the Custer Motorway that would take us right to Custer and avoid paved roads, heads up over the mountains at 9k feet.... just turn at Challis and follow the dirt road. Awesome! Custer Motorway it will be!

P7313384-X2.jpg



Kiddo got a lot of play time in the river

P7313404-X2.jpg


DJI_0022-X2.jpg


P7313421-X2.jpg


P7313449-X2.jpg


P7313465-X2.jpg



Camp from above

DJI_0018-X2.jpg



Doesn't get much better than this!

IMG_4945-X2.jpg


20200731_195826-X2.jpg



Continued Below...
 

Hodakaguy

Adventurer
Continued from above...

If anyone has ever watched Lucy and the long long trailer you will get this...my wife started collecting rocks to bring home lol.

P8013476-X2.jpg



Heading out again....more amazing scenery

IMG_4961-X2.jpg


IMG_4941-X2.jpg



Heading up into the mountains on the Custer Motorway.

P8013484-X2.jpg


IMG_4976-X2.jpg


20200801_084712-X2.jpg



Time to get the drone out again for another perspective.

IMG_4974-X2.jpg


IMG_4975-X2.jpg


DJI_0029-X2.jpg


DJI_0028-X2.jpg



Continuing down the trail.

P8013602-X2.jpg


P8013592-X2.jpg


P8013621-X2.jpg



Kiddo cruising on the bed

P8013545-X2.jpg




More history. This was once a toll road and whats left of the toll cabins are still here at 9k feet. Very cool!

P8013546-X2.jpg


P8013556-X2.jpg


P8013560-X2.jpg



Wild strawberries...yummmm

P8013523-X2.jpg


P8013510-X2.jpg


P8013579-X2.jpg



Continued below...
 

Hodakaguy

Adventurer
Continued from above...

Didn't take long to find the old dump site.

P8013567-X2.jpg


P8013570-X2.jpg


P8013577-X2.jpg



A little photography along the way

P8013630-X2.jpg


P8013650-X2.jpg


P8013661-X2.jpg



Next we visited the ghost town of Custer. Another great piece of history. But first up...breakfast :)

P8013701-X2.jpg


P8013702-X2.jpg



In a small remote ghost town in the mountains of ID we ran into Chad with Adventure Wagon! Chad is an awesome guy and makes some really cool Sprinter gear. We are running his Mule bags and basically patterned a lot of our interior off his kits. Great to chat with you Chad!

P8013708-X2.jpg



Showing Chad our build.

IMG_5039-X2.jpg



Chad even placed a Hodakaguy sticker on his van :)

P8013721-X2.jpg



Custer from the Air

DJI_0031-X2.jpg



And checking out the old buildings.

20200801_122237-X2.jpg


P8013739-X2.jpg


P8013752-X2.jpg



Next we explored the abandoned Yankee Fork gold dredge. Unlike the Sumpter dredge that we explored last trip the Yankee dredge is completely intact with all the original equipment...plus they let you climb and explore on all levels!! Such a cool piece of mining history.

P8013846-X2.jpg


P8013842-X2.jpg



Heading into the dredge, people provide a good reference and show the scale of the bucket line.

P8013775-XL.jpg



I spy a Sprinter :)

P8013778-X2.jpg



Continued Below....
 

Hodakaguy

Adventurer
Continued from above...

Massive electric powered winches. These were used to position the dredge and raise/lower the bucket line.

20200801_125703-X2.jpg


20200801_125741-X2.jpg



Resistor banks used as speed controls for the motors

20200801_125808-X2.jpg



Thats it...just a little further :)

20200801_125935-X2.jpg


20200801_130011-X2.jpg



Upper axle on the bucket line

20200801_130114-X2.jpg



Grizzly bars to reject large rocks before they get to the trommel.

20200801_130132-X2.jpg



Bull gear that drives the bucket line. This is the weakest spot on the dredge, the large bull gear was replaced 3 times while this dredge was in operation.

20200801_130324-X2.jpg


P8013798-X2.jpg



Trommel from above

20200801_130407-X2.jpg



Checking out the sluice runs

20200801_130620-X2.jpg


20200801_130629-X2.jpg



Gold recovery area, the pot on the lower right was used to burn off the mercury and recover the gold.

20200801_130804-X2.jpg



The dredge made its own power via two 1940 Ingersol Rand Diesel engines running two generators.

20200801_131030-X2.jpg


20200801_130921-X2.jpg



Got the drone back out for a few shots of the dredge

DJI_0051-X2.jpg



Great shot of the tailings left behind from the dredge

DJI_0024-X2.jpg


DJI_0020-X2.jpg


DJI_0014-X2.jpg



Continued Below...
 

Hodakaguy

Adventurer
Continued from above...

Wife got in a little panning while we were there...didn't get anything but more cool rocks to pack in the van :)

P8013851-X2.jpg



Sawtooth Mountains as we head south and home

20200801_151425-X2.jpg



Hot springs along the hwy....gonna have to come back here!

P8013899-X2.jpg



Restaurant along the road lol.

20200801_162516-X2.jpg



Stopped for ice cream and had to leave a sticker :)

20200801_141307-X2.jpg



Next morning all that was left was to make coffee and roll into home.

20200802_053308-X2.jpg



Hodakaguy
 

Hodakaguy

Adventurer
Back to the Build out....

On the last trip we liked the Mule bags so well that we ordered a third bag while we were on the road. These bags are very well thought out and really help organize the van and keep clutter off the floor. Here I'm getting ready to install the two missing panels and install the 3rd Mule bag.

20200806_153450-X2.jpg


20200806_154121-X2.jpg



Sealing the screw hole with a soldering iron to ensure the tweed can't start fraying.

20200806_154831-X2.jpg



Panels installed

20200806_155611-X2.jpg



Mule bag out of the box.

20200806_155919-X2.jpg


20200806_155924-X2.jpg



Installing the mounting hardware onto the L-track.

20200806_160044-X2.jpg



And installed. Lots-0-Storage space

20200806_162729-X2.jpg


20200806_170642-X2.jpg


20200806_170659-X2.jpg


20200806_170813-X2.jpg



The crank for the Fiamma awning fits perfectly in the loops on the bottom of the bag.

20200807_114742-X2.jpg


20200807_114750-X2.jpg



Continued below...
 

Hodakaguy

Adventurer
Continued from above...

Next up it's time to seal this van up and make it weather proof. There is a glaring over site on Mercedes part when they designed the clips for the plastic side panels. Water can easily run behind the clips and into the walls during rain storms or when washing the van....not good. Now that I have my walls insulated the last thing I want is water getting trapped in with the insulation, time to fix this issue.

THIS IS A MUST DO FOR ANY SPRINTER

Note: For 2019 Mercedes finally decided to address this issue by adding a little rubber lip around each retaining clip to keep water out. I've heard that the seal is marginal at best and it's recommended that you still remove & seal these clips as well for a reliable waterproof seal.

Time to start removing the trim

20200807_052402-X2.jpg



The rear edges of the front doors and both ends of the slider doors have screws that need to be removed.

20200807_064441-X2.jpg


20200807_064436-X2.jpg



I purchased a cheap set of plastic body panel removal tools from Harbor Freight to remove the trim panels, they worked great. Note: Make sure the fulcrum of the tool is below the edge of the body panel so you don't leave any small dimple dents as you remove the panels. While pulling on the panel from the end work the tool down the trim piece and pop loose each trim clip.

20200807_064555-X2.jpg


20200807_064646-X2.jpg



Some clips will stay with the trim piece and some will stay in the body....either way not a big deal.

20200807_064800-X2.jpg


20200807_052741-X2.jpg


20200807_055416-X2.jpg



Next I removed the clips from the body using another one of the HF tools. You can use a screw driver here as well to reach in and compress/release each side of the clips, the HF tool makes it a quick process. The only thing keeping water out is the plastic contact against the body, and it's not a very good seal. Go slow and you won't break and of the clips, I managed to remove all the clips without breaking any in the process.

20200807_055443-X2.jpg


20200807_055751-X2.jpg


20200807_055757-X2.jpg


20200807_055800-X2.jpg


20200807_055704-X2.jpg



Next I used a bent pair of needle nose pliers to release the clips that were still attached to the side panels. I just reached in with the pliers and slightly compressed the tabs until the clip released.

20200807_061339-X2.jpg


20200807_061355-X2.jpg


20200807_061408-X2.jpg


20200807_061442-X2.jpg



Clips and Panels Removed.

20200807_063309-X2.jpg


20200807_065025-X2.jpg


20200807_065225-X2.jpg



Continued Below...
 
  • Like
Reactions: MCX

Hodakaguy

Adventurer
Continued from above...

I first cleaned the body surfaces a couple times with Windex then went over the clip locations with some wax/de-greaser.

20200807_070740-X2.jpg



HodakaDad helping me clean the clips

20200807_081119-X2.jpg


20200807_071306-X2.jpg


20200807_091651-X2.jpg



I'll be using Sikaflex 221 to seal the clips to the body.

20200807_091628-X2.jpg



Sika applied to the clips

20200807_082800-X2.jpg



The clip is installed vertically, I installed them slightly off vertical then rotated them into position for a good seal.

20200807_082828-X2.jpg


20200807_082834-X2.jpg


20200807_082841-X2.jpg


20200807_082924-X2.jpg


20200807_093223-X2.jpg


20200807_094451-X2.jpg



With all the clips sealed in place just line up the panels to the tabs and use your palm to snap the panels back into place. Nice and waterproof now, I'll sleep easier when it rains now :)

20200807_095337-X2.jpg




Next up I started the install of the Switch Pro SP9100. The Switch Pro is a programmable 8 position switch panel that you can use to control your accessories (Lights, Air compressors, etc). The unit is fully programmable with the phone app...you can tie switches together, make a switch start stop with the engine, tie aux lights to your high beams etc. I had one on my last build and loved it, very versatile and a super clean way to add a bunch of switches. The head unit/switch assembly is very thin and robust, the brains of the unit is all solid state and has it's own over current protection. The unit comes with stickers that you place on each switch location to mark your intended use for that switch, the lighting is dim-able and you can change it to any color.

The switch panel.

20200807_143614-X2.jpg


20200807_143624-X2.jpg



I decided to place the unit in the headliner above the dome light assembly. It's within easy reach here and I don't have to look at the lighting while driving at night.

20200807_143656-X2.jpg



Marking out the hole location.

20200807_144003-X2.jpg


20200807_150107-X2.jpg


20200807_150053-X2.jpg



Continued Below....
 
  • Like
Reactions: MCX

Hodakaguy

Adventurer
Continued from above...

Used a razor knife to cut the tweed.

20200807_150331-X2.jpg



Then used a soldering iron to burn the edges of the tweed to keep the fabric from fraying.

20200807_150834-X2.jpg



Next up I used an ultrasonic tool to cut out the headliner

20200807_152113-X2.jpg


20200807_152109-X2.jpg


20200807_152523-X2.jpg


20200807_152528-X2.jpg



Preparing the switch unit for install by inserting the studs on the rear of the unit that hold the retaining clips in place

20200807_154848-X2.jpg


20200807_154939-X2.jpg


20200807_155110-X2.jpg



Switch unit installed.

20200807_160136-X2.jpg


20200807_160116-X2.jpg


20200807_160212-X2.jpg


20200807_160325-X2.jpg



The brains of the unit will be installed soon.

20200807_160250-X2.jpg


20200807_160247-X2.jpg



More to come soon....

Hodakaguy
 

jgaz

Adventurer
Continued from above...

Wife got in a little panning while we were there...didn't get anything but more cool rocks to pack in the van :)

P8013851-X2.jpg



Sawtooth Mountains as we head south and home

20200801_151425-X2.jpg



Hot springs along the hwy....gonna have to come back here!

P8013899-X2.jpg



Restaurant along the road lol.

20200801_162516-X2.jpg



Stopped for ice cream and had to leave a sticker :)

20200801_141307-X2.jpg



Next morning all that was left was to make coffee and roll into home.

20200802_053308-X2.jpg



Hodakaguy
Excellent pics and trip report.
Thanks for posting them.

And thanks for the tip on sealing the trim clips. Passing it on to a Sprinter driving friend.
You‘re right, it is a poor design.
 
Last edited:

ericvs

Active member
I am dreading doing the plastic on my van, but your post was inspiring!
Thank you.

Great build, looking forward to following along
 

Arjan

Fossil Overlander
Love the trip report - thank you VERY much !

That build is very inspiring.

Looking at an Inveco 4x4 Daily here in France...
 

MCX

TalesFromTheDesert.com
Loved the pictures...beautiful country! That dredge looks like it could be started up tomorrow and start dredging for gold.
 

Forum statistics

Threads
187,908
Messages
2,899,805
Members
229,071
Latest member
fireofficer001
Top