6x4 .25 center with back cut out in area away from the mounts making sort of c channel. 6x2 .125 sides and 2x2 carrier. Comp 4x4 HD spindle and double shear bracket mounted at a funny angle and removable. I didn't measure or plan enough before cutting the center section. Opens to drivers side with a stop built into the spindle mount. Helps balance weight with a full tank of fuel and less distance/ moment from the tire to spindle.
All the steel is leftover drops from a local structural shop. Yea, It's heavy and needs additional frame mounts. Home garage, welder and angle grinder built.
![uploadfromtaptalk1434476965169.jpg uploadfromtaptalk1434476965169.jpg](https://expeditionportal.com/forum/data/attachments/221/221595-db231dc0c657579242281c43b591fcc0.jpg)
![uploadfromtaptalk1434477083475.jpg uploadfromtaptalk1434477083475.jpg](https://expeditionportal.com/forum/data/attachments/221/221596-ca2719405cd77332b2b52ef299560933.jpg)
![uploadfromtaptalk1434477148274.jpg uploadfromtaptalk1434477148274.jpg](https://expeditionportal.com/forum/data/attachments/221/221597-03e82640a9aeee9b83c25b364c2d985d.jpg)
Sent from my LG-D800 using Tapatalk