Todd780
OverCamper
Thank you for the breakdown. I appreciate it.
How do you transport your fishing rods?
- Thread starter ElGiganteJake
- Start date
A couple of years I bought a 1986 Suzuki Samurai as a toad for my motor home, and to run to the beach for surf fishing... The Samurai is pretty short , but I wanted to carry my 2pc rods inside... I had about 5-1/2' of roof line to mount them in... 1st of all, there were only 3 overhead grab handles for the passengers, to mount to.. So I installed one more over the drivers side door, using jack nuts... It looks factory and is very sturdy... It worked out well... Then I bought a rack system off of Amazon... https://www.amazon.com/LITTLEMOLE-F...cphy=9031059&hvtargid=pla-1454310648947&psc=1 ...It is well made, and easily sturdy enough for my light weight 9-1/2' & 10', 2 pc rods... I pretty sure I could fit a 11', 2pc rod if I wanted ... I decided on a solid mount, as apposed to a web type, because there isn't a lot of room for movement in the tiny Samurai... Here is the final result...
Butch
Butch
I carry the same two rods inside my truck's cab... Before I just laid one rod across my folded up rear bench seat of my extended cab 2008 GMC Sierra... That has worked fine for as long as I only carried only 1 rod, but recently I bought another heavier rod... One rod is a two piece 9-1/2", and the other is a two piece 10' ... Both will barely fit cross ways in my cab... So this is what I did..
1st I bought a Attwood Vertical Mount Rod Holder... It is a well made product of heavy rubber that wont scratch the rods.. It could have a little more spacing between the rods, because with reels attached, you can't get more than 2-3 rods on it... But for my purpose, it was fine... I then bought a piece of Kadex (You gun guys use this for pistol holsters) from McMaster-Carr to mount it to... I cut it to size and bent to shape, before mounting the holder to it (It is easy to work with)... I then used a quick connect strap I re-purposed from an old suitcase clothing tie-down... I hooked one end of the straps to the child seat tie-down loops behind the truck seat headrest... Once disconnected from the rod holder, these could be flipped out of the way...
Butch
1st I bought a Attwood Vertical Mount Rod Holder... It is a well made product of heavy rubber that wont scratch the rods.. It could have a little more spacing between the rods, because with reels attached, you can't get more than 2-3 rods on it... But for my purpose, it was fine... I then bought a piece of Kadex (You gun guys use this for pistol holsters) from McMaster-Carr to mount it to... I cut it to size and bent to shape, before mounting the holder to it (It is easy to work with)... I then used a quick connect strap I re-purposed from an old suitcase clothing tie-down... I hooked one end of the straps to the child seat tie-down loops behind the truck seat headrest... Once disconnected from the rod holder, these could be flipped out of the way...
Butch
Moyshe Kapoyer
Active member
I just use the rod holders in the boat...lol.
I was looking for this answer, why on earth would you fish from your car/suv/truck?
I surf fish….. Drive to the beach… Fish.. No boat needed….
Butch
ShootingCar
New member
BnDadventures
New member
Riversmith River Quiver.
Works great
riversmith.com
Works great
Standard River Quiver (10'4)
The River Quiver is designed to keep your rods fully assembled and secure on top of your vehicle so you can start fishing more and rigging less. With its versatile mounting system, the River Quiver can be mounted to any vehicle's crossbars.
riversmith.com
Sparse Gray Hackle
Geezer
I transport my fly rods in rod cases, between the couch back and passenger side window in my popup. Nice and safe.