Obsessed2findARuggedHybid
Well-known member
So these don't work? Crazy how Expion360 sells them.
See below
So these don't work? Crazy how Expion360 sells them.
See below
Every trailer will have issues. I own a 2023 Kimberley S3, and I have repaired 20 plus items. Still awesome.We haven't seen too many problems with the new trailers. There was a TSB for the solar being incorrectly plugged in at the top, we have had one with a warped fridge door, but that's one out of dozens. There have of course been small items such as latch/hinge adjustment but we have had great luck with them
MSRP shouldn't be happening unless you don't shop around
Very true. No matter what you buy, you should budget a good amount of money (say $5,000 or so) to make any trailer exactly the way you want it. That could mean upgrades, modifications, or even fixing things from the factory that may be to their spec but not yours. For example, one of the first things we do is go to an expert trailer suspension shop (not an RV dealer) and have them thoroughly review the suspension, brakes, and tires including balancing and alignment. All bearings, seals, grease zerks inspected and redone.Every trailer will have issue
Every trailer will have issues. I own a 2023 Kimberley S3, and I have repaired 20 plus items. Still awesome.
I checked my wheel bearings after a few thousand miles, and already had one outer that was over heated, and it was a Timkin. Lack of grease. I think its the reality of anything hand built, regardless of price.Very true. No matter what you buy, you should budget a good amount of money (say $5,000 or so) to make any trailer exactly the way you want it. That could mean upgrades, modifications, or even fixing things from the factory that may be to their spec but not yours. For example, one of the first things we do is go to an expert trailer suspension shop (not an RV dealer) and have them thoroughly review the suspension, brakes, and tires including balancing and alignment. All bearings, seals, grease zerks inspected and redone.
Isn't that crazy? Talk about something a customer should be able to take for granted. We've just heard so many stories like that over the years that we never take anything for granted. Trust but verify when it comes to wheels/bearings/brakes/suspension!I checked my wheel bearings after a few thousand miles, and already had one outer that was over heated, and it was a Timkin. Lack of grease. I think its the reality of anything hand built, regardless of price.
That's right. No matter how much research and due diligence you do or how much you pay, things will always slip through the cracks on an RV build. It even happened with our Kingdom build, and we wrote up the specs all the way down to the exact size of cabinets, placement of lights, wiring, etc. We have said it before. All RVs, regardless of how much you pay for them, are essentially pieces of crap when compared to other complex manufactured products. It's just that some RVs smell much better than others.Starting to see issues rising up on the new Xplores. ROA has been making the point that all trailers have issues. Even 125-155 k ones. My Trail Marker has had several as well. Mostly do to the custom aspects and most of the components being a first time install for the manufacturer.
I assume that most of the folks that are talking about issues on the Facebook page were bought from ROA and they seem to be taking care of them which is awesome. I do wonder if some of thier customers see thier you tube videos and go out and think they can hammer thier rigs like in the videos.
One owner says the mounting brackets on the solor panels break everytime he goes out on a trip. Very suprised that thier is so much vibration with the Cruisemaster suspension. Likely tire pressure but every time.
Lot of systems to dial in on this bad boy.
Do you have a link to that Facebook post? I looked at the 195 today at Overland Expo and liked it but think the 145 may be better for our situation. Thanks!