Inner Fender Liners 3rd gen 4runner

[bikerjosh]

I'm missing both fenderliners on my 3rd gen. It has a 2" body lift, so not sure if previous owner s-canned them cause they wouldn't fit or what. Has anyone ever made there own? I was thinking of using really thin sheet metal or rubber/plastic.
Any thoughts?
thanks Josh:snorkel:

 

[Bighead]

I had a friend make his own using the originals as a template and just making the liners longer to compensate for the BL. I think he used some heavy duty material from McMaster-Carr for the new liners.


EDIT: I am talking about the small piece the shields the engine bay from the wheel well.

 

[corax]

Pond liner works well and can be found at some of the big box home improvement stores. Don't try to use sheet metal - the body does move relative to the frame. I actually used an old race slick for mine, my fender liners are rated for 200mph.

You can also do a search for "gap-guards" if you just want to buy a set.

 

[Gerdo]

Junk yard.
They are going to be a huge pain to make.

 

[Ric]

just go to Home Depot/Lowes, and buy some carpet runner, and cut away.
Its cheap, easy to cut, and will last forever, Ive mine on my 99 for about 4 years, and on the 04 for about 2 years now :victory:

 

[Gerdo]

Josh
You are talking about the whole inner fender and not just gap guards, right?