Irwin the 1995 Disco (200tdi and 5 Spd swapped)

Colorofkris

Well-known member
It’s official! The disco made it home!

756695752257370b59c264810916388b.jpg


b0ca443873f940e7d493df5620a62b9b.jpg




Sent from my iPhone using Tapatalk
 

Colorofkris

Well-known member
As exciting as it was getting the discovery back this weekend it also means it’s time to get to work. There’s a lot to do to get the rover where it needs to be for uwharrie coming up in a couple weeks. Today I only had a few minutes but I was able to tension up the new ish belts that I put on right before she was sent off for the transmission repairs. When I got her home she was squeaking like crazy and the power steering didn’t feel quite right. Turns out the larger belt was a little loose and the belt was just dragging over the pulley. She’s all good to go now though. Next up I need to figure out what’s going on with the Hellas on the front bumper. They aren’t turning on.

41b074c12967719a8cbc355f468520b0.jpg



Sent from my iPhone using Tapatalk
 

Colorofkris

Well-known member
Today we say goodbye to the Frankenstein bumper that came on the D1. Saturday we are installing a used arb bumper. The bumper is from a d2 so I’m interested to see how it looks. I’m glad to have finally removed the old bumper though, it was barely welded on and in person it just looked crappy. The arb will also give me two points as well as the ability to mount a winch that I can trust lol.

9478121c1f76a73da50ffc2286e02dd3.jpg


b852743b87e77cd7c7c075d4127b8c0e.jpg


bf17206395d00fc5e863a490cfee854a.jpg


ef7615daf54bf3f052e26223ae91f79b.jpg



Sent from my iPhone using Tapatalk
 

Colorofkris

Well-known member
Arb bumper is officially on and I love it! At some point this week I will be putting on the hella lights and ditching the led light bar. I also got a winch to go on as well. Hoping to have everything finished up before uwharrie safari this next weekend!

3c03177074f7f6da7dc04399e591a1cd.jpg


d258a7c8e2cddfe341a5930e81c37ccf.jpg


e8e5f8f88fa174e314f2a7a6a7df1814.jpg


304e2bdf7be16c0bb3e7a59cdbb7955d.jpg



Sent from my iPhone using Tapatalk
 

Colorofkris

Well-known member
Here we go with some more updates! Hellas are mounted, for some reason I can’t get them to work though. There is power to the resistor and to the switch, however they are not coming on. Sadly I don’t think I’ll have time to dig into them
Fully before the weekend. Winch roller is mounted and ready for the winch to go on. Also the limb risers are installed using the old light mounts from the old bumper.

740930e6123b698c3fa6eb873c6ff3d3.jpg


41d1cf579272acfede77ba7c7e8d9129.jpg


7e5d8ff67a584e6f95312bc71b8c0c76.jpg



Sent from my iPhone using Tapatalk
 

Rovertrader

Supporting Sponsor
No idea how the Hellas are wired, but if you/PO used the factory foglight switch, you’ll need the low beams on to activate.
Hope to meet you this w/e at URE!
 
Here we go with some more updates! Hellas are mounted, for some reason I can’t get them to work though. There is power to the resistor and to the switch, however they are not coming on. Sadly I don’t think I’ll have time to dig into them
Fully before the weekend. Winch roller is mounted and ready for the winch to go on. Also the limb risers are installed using the old light mounts from the old bumper.

740930e6123b698c3fa6eb873c6ff3d3.jpg


41d1cf579272acfede77ba7c7e8d9129.jpg


7e5d8ff67a584e6f95312bc71b8c0c76.jpg



Sent from my iPhone using Tapatalk

Dammmmmnnnnn, I love me some OG Discos!!!! :love:
 

Colorofkris

Well-known member
No idea how the Hellas are wired, but if you/PO used the factory foglight switch, you’ll need the low beams on to activate.
Hope to meet you this w/e at URE!

Wiring them is a nightmare lol. I have them switched up to my rocker panel I place of the radio unit so they don’t run in conjunction to the headlights. After looking at the lights I think they might of had some water get in the lens so I’m going to probably pull them apart an check the bulbs and connections inside the light housing. If that doesn’t work I’m going to pull the wiring and start from scratch. The wiring is an absolute mess anyways and the whole lot could use some cleaning up.

And same to you! Come find me, we will be headed out tomorrow evening (Thursday).


Sent from my iPhone using Tapatalk
 

Colorofkris

Well-known member
Quick pre trip update-

Winch is wired and ready to rock. Gear is packed. Need to top off fluids tomorrow before hitting the road. I’m ready to rock and roll! Super excited about my first Uwharrie safari! I’ll hopefully be writing up a good trip repot upon returning home with lots of pictures. I do plan on trying to price together a YouTube video of the trip as well which I will link in the forum once it’s done too.

Also if you are going to be out at the safari this weekend come say hey and introduce yourself! Let me know you follow my forum, it will keep me motivated to post more stuff on here!


Sent from my iPhone using Tapatalk
 

Forum statistics

Threads
188,026
Messages
2,901,325
Members
229,411
Latest member
IvaBru
Top