Its a dream but a good dream !

[B85]

With spacers.

 

[B85]

Left side welded.

 

[B85]

Spacers cut and installed. Will test fit Wednesday .

 

[B85]

Installed. And it may not work as wanted ?

 

[B85]

Crossbar and hinge.

 

[B85]

Building parts for the first part of the platform.

 

[B85]

Started welding parts.

 

[B85]

 

[B85]

Turning into a lift.

 

[B85]

A little more welding and it will go up by hand.

 

[B85]

 

[B85]

Next section.

 

[B85]

Just a note. The lift system has been tested and it works. But not to my standers. Going to rework it and see if I can make it work better. Don't try to build it this way.

 

[B85]

The main problem was the cable,pulley system lifting a different speeds and jamming. It was a 4 to 1 system. It worked but not well. After more testing I came up with a system that is a 2 line to one and its 2 to 1 . The big problem was trying to get 2 lines to wind on the drum of the winch at the same time. Their maybe a way but I just don't know it ! LOL What I did was turn the 2 lines into 1. Will test it more and do some more welding and we will see ?

 

[B85]

Rear part welded.